APERTE, UAB - WHOLESALER OF ARCHITECTURAL AND FURNITURE GLASS

Dimensions range: Maximal - 9000 x 3210, Thickness range - 2 - 19, Notes: Dimensional tolerances - ±0,5 mm

Dimensions range - Maximal - 3210 x 2500, Thickness range - 3 - 19, Notes - Cutting is done by a water jet mixed with abrasive material at high pressure. This method of glass cutting enables performance of more complex shapes than other type tooling we offer. Glass edges cutting of water jet are made in matt and does not require additional treatment.

Dimensions range - Minimal - 80 x 80, Maximal - 6000 x 3000, 6000 x 2800, 3600 x 2200, Thickness range - 3* - 19, 3* - 19, 3* - 19, Edge type - The line for edge grinding, Double edge processing, Four edge processing, Notes - C-bevel Trapezoid **Blunted *** The matt or polished edge, C-bevel Trapezoid ** The matt or polished edges, C-bevel Trapezoid ** The matt or polished edges. * Glass with a thickness of 3 mm we don’t finish of trapezoidal profile. **Finishing of trapezoidal profile is performed by peripheral grinding wheels with not adjustable width phase of 0.5 mm. ***Blunting is performed on customer request in order to prevent of accidental laceration during glass installation, as well as in the case of glass designed for tempering, if any treatment of edges foreseen.

Dimensions range - Minimal - 100 x 100, Phase width - 3 – 20 mm, 4 – 28 mm, 5 – 30 mm, 6 – 35 mm, 8-19 – 40 mm, Thickness range - 3 – 19, Edge type - C-bevel* Trapezoid ** The matt or polished edges, Notes - Dimensions tolerances - ±0,5mm Phase width tolerances - ±0,5 mm, * Edge type for glass of thickness 3-6mm. Matt treatment. ** Edge type for glass above of the 6mm. This treatment is carried out as an additional operation on customer request.

Dimensions range - The minimal diameter of the holes - Ø 5*, The maximal diameter of the holes - Ø 70 - Ø 500**, Glass min. max. size - 180 x 50, 6000 x 3200, Thickness range - 3 – 19**, Notes - Hole diameter tolerance 0 / -0.2 mm, Hole spacing tolerance - ± 0.5. * The minimal hole diameter should not be less than the thickness of the drill glass. ** It Is possible to make holes with larger diameter and thicker glass using CNC machines.

Dimensions range - Minimal - 200 x 100, Maximal - 6000 x 3210, Thickness range - 3 - 19, Notes - The matt or polished edges, The pen maximum width of 3 mm. Writing on glass is made only in the mat, The maximum width of 7.7 mm engraving. Engraved pattern is performed both in glass matt and polished, Minimal inner radius for the ground edge - R8 Minimal inner radius for the edge polished - R25 The glass minimal width from the outer edge of the glass to the edge of the cut - 100 mm

Dimensions range - Minimal - 270 x 50, Maximal - 6600 x 2800, Thickness range - 3** – 19, Notes - Painting is made by lead-free, ceramic paints* and UV. * Glass decorated of ceramic paints has to be tempered. ** Glass of thickness 3mm painted of ceramic paints is subjected to only the paint curing process. Glass for the indicated thickness is not tempered glass.

Dimensions range - Minimal - 250 x 150 mm, 150 x 100 mm, Maximal - 6000 x 3300, 3000 x 1600. Thickness range - 4 – 19, 2 – 19. Notes - Resolution up to 1410 x 1410dpi Printing is done with ceramic paints. Type of material: glass, metal, plexi, other, Resolution up to 1440 x 1440dpi Printing is done with water paints. Type of material: glass, metal, plexi, other.

Dimensions range - Minimal - 270 x 50, Maximal - 6000 x 2600, Thickness range - 3** – 19, Notes - Painting is made of lead-free, ceramic paints. * Painting is carried out by applying a layer of paint on a shaft over the entire surface of the glass. Glass painted this method has to be tempered. ** 3mm glass is only subjected to the paint curing process. Glass for the indicated thickness is not tempered glass.

Thickness range - 6 – 15, Notes - UV method we make bonding of materials such as: glass-glass, glass-metal. The edges of the glass intended for bonding with each other by this method must be made in polished trapeze.