Alumina Ceramic Igniter With Detachable Holder

Ceramic Pellet Igniter Information Ceramic Boiler Ignition Igniter surface can reach a permanent working temperature above 900℃;Since air can through and around inside and outside of the heater tube. Heat can be transferred from both inside and outside of ther heater element. Igniting wood chips, firewood, coal bricks or other biomass fuel. Specification: Voltage: 120V / 230V Power: 150W / 170W / 200W / 230W Tube Size: OD10.5 × ID6.5 × L78 mm Supporting Socket: NO.7 Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) Range of temperature: 800~1100 °C Alumina Pellet Igniter Advantages 1) Higher temperature, about twice of traditional metal sheathed heater; 2) Shorter ignition time, about 60~90 seconds 3) Electrically insulated with no exposed electric contacts 4) Wear and corrosion resistance 5) Long life time 6) Easy to install and replace 7) Long-lasting (non-aging). Tested to 100,000 cycles. 8) 800~1100°C at steady-state temperature.

INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V/230V Power: 160 W, 180 W, 210 W, 225 W, 230 W, 240 W, 255 W Tube Size: OD10.5 × ID6.5 × L90 mm Supporting Socket: NO.4/NO.5/NO.6/NO.29 Lead wire: 300mm/400mm/500mm/900mm (Customized is accept) Range of temperature: 800~1100 °C Ceramic igniter technology benefits: A fraction of the energy consumption compared to conventional cartridge or element heater. Long-lasting (non-aging). Time to ignition 60~90 seconds. Tested to 100,000 cycles. Easy to install and retrofit. 800~1100°C at steady-state temperature. Impervious to oxidation and corrosion.

Product Specification: Application: Used for 936 soldering station Voltage: 24VAC Heating Resistance: 3.0±0.3Ω (23℃±2℃) Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface

INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V / 230V Power: 300W / 350W Tube Size: OD11.5 × ID6.5 × L108 mm Supporting Socket: NO.43 Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) Range of temperature: 800~1100 °C Applications: Kerosene fan heater Wood pellet, wood chips stove or boiler Small scale biomass industrial furnace ignition Incense burner