DRAWTREND LIMITED

New in Version 7: •OsziCam® •Statusrecorder •LogView •Online to a SIMATIC S5 via SINEC L2 •Online to a SIMATIC S5 via H1 •Calling of the STEP5 COM packages on Windows XP (32/64 Bit) Windows Vista (32/64 Bit) Windows 7 (32/64 Bit) Windows 8 (32/64 Bit) Windows 10 (32/64 Bit The combined version of S5 for Windows® and S7 for Windows® contains all functionalities of both tools in one application. S5 Programming S5 for Windows® provides the tools for creating, modifying, testing and documenting programs for programmable logic controllers (PLC). S5 for Windows® is designed for programming the Siemens PLC family SIMATIC S5 with STEP5. The Function Block Diagram (FBD), the Ladder Diagram (LAD) and the Statement List (STL) are used as presentations for S5. Existing S5 programs can be edited directly without im-/export. S5 for Windows® is compatible to the original Siemens programming unit. For automatic troubleshooting the S5 Doctor functions are integrated as well.

New in Version 7: •OsziCam® •Statusrecorder •LogView Windows XP (32/64 Bit) Windows Vista (32/64 Bit) Windows 7 (32/64 Bit) Windows 8 (32/64 Bit) Windows 10 (32/64 Bit The combined version of S5 for Windows® and S7 for Windows® contains all functionalities of both tools in one application. S7 Programming In order to program the Siemens PLC-control series S7-300 and S7-400 efficiently and comfortably, IBHsoftec provides the software S7 for Windows®. This software can be combined with S5 for Windows® or runs stand alone. With S7 for Windows® the entire Simatic S7-300 and S7-400 PLC-control series can be programmed. The complete S7 instruction set is im-plemented in the presentations Statement List (STL), Function Block Diagram (SFC) and Ladder Diagram (LAD). All STEP7-projects can be edited directly without import/export. Archived STEP7-projects can be opened directly. All write accesses on the PLC can be prevented with a password protection.

The IBH link S5++ is a cost-efficient alternative solution for conventional PLC-PC-connections via Ethernet. If a PLC has to be connected via Ethernet with a PC, usually a CP communication processor needs to be applied to the PLCs rack. Due to the increasing integration in automation technology, more than ever a connection from a PLC to a PC is required. In general, the communication processors (e.g. CPs from Siemens, or Ethernet components from other manufacturers) are used for the connection to the PLC. As an alternative solution, IBHsoftec has recently introduced the IBHLink S5++ for connecting a PLC with a PC. The IBHLink S5++ is a compact and robust Ethernet-converter within a 15-pin Sub-D-housing for a connection via a switch, a hub or even directly to a PC with a common network adaptor. The used protocol is the standard TCP/IP protocol. In this way, the user can benefit from all the advantages of Ethernet like remote maintenance via a standard router or VPN-connections.

If a Siemens PLC has to be connected with a PC via Ethernet, the normal way is to take a CP / Communication processor. IBHsoftec has a more flexible solution: IBH Link S7++. It is a cost efficient Ethernet-PROFIBUS-Gateway for programming, drive configuration, for communication between PC and Siemens PLCs, inter-PLC communication and FDT applications. It is possible to connect the IBH Link S7++ with a hub or switch or via a Crossover cable direct with your PC network card. The used protocol is standard TCP/IP, so you can control your system using VPN or a router. IBH Link S7++ features: - PROFIBUS nodes diagnostic via web browser - Configuration via web browser - Configuration via NetPro - Windows 8 64 Bit support - Windows 10 64 Bit support - STEP7 64 Bit support - Time synchronisation - PROFIBUS diagnostic - Slave diagnostic - Integration within the TIA portal - S7 routing via RFC1006 - Fetch/Write via RFC1006 - PLC - PLC communication

PLC-ANALYZER pro 6 by AUTEM is a software system for logic analysis and recording of measured values in PLC-controlled facilities. Acquisition, representation and evaluation of PLC signals such as input, output, flags, timer, counter, data of data blocks, is now very easy. In addition, video data can also be recorded synchronously with the PLC process data (Videotrack module). Fields of application Failure diagnosis Detecting and localizing of sporadic errors Cycle time optimization Long-term recording of measured values System documentation, TPM/OEE, EU-Machinery directive Condition monitoring / Predictive maintenance Warrenty: incorruptible clarification Quality assurance Installation, development, maintenance Live display allows the observation of the signal waveform in real time. Analysis and evaluation can already be carried out at the time of recording. In addition to long-term recording, trigger conditions can be specified for the acquisition of particular events.

The PROFIBUS-Tester V5 is a powerful diagnostic and troubleshooting tool for testing the cables, measuring the signals and analyzing the communication of PROFIBUS networks. Battery-powered and with an integrated graphical display it allows direct display of measurement results in stand-alone mode. In addition, the PROFIBUS-Tester V5 supports the export of test results for advanced analysis. Measuring functions Cable- and Signal test Analysis of bus physics, communication Protocol and frame analysis Storage oscilloscope Topology-Scan Long-term trend Live-Status of all bus devices Operating in stand-alone mode the PROFIBUS-Tester V5 immediately gives an overview of the cable (segment length, unwanted reflections, bus termination…), the bus status and the signal quality. The cable test provides a detailed failure description and an estimation of the distance between failure and test location.

The IBH Link UA is an OPC UA Server/Client module with integrated firewall for the SIMATIC S5, S7-200, S7-300, S7-400, S7-1200, S7-1500 and LOGO! (Ethernet versions) PLC. The configuration of the IBH Link UA is made with the free IBH OPC UA Editor, the Siemens STEP7/TIA PORTAL While OPC Data Access allows the access to data in real time, supports OPC Historical Access, also called OPC HDA access, access to already stored data. From simple data logging systems to complex SCADA systems historical data can be queried on standardized manner. The activation of the Historical data is easily performed using the web browser. Administration via web browser Historical Data Alarms & Conditions Modbus connection MQTT connection NEW: Support for SINUMERIK 840D/840D SL NEW: Support for the Mitsubishi controller MELSEC IQR, FX5, QnA and L series NEW: Support for the Rockwell controller Controllogix and Compactlogix NEW: Download and Upload of the configuration on a MicroSD card

With the newly developed gateway IBH Link IoT and the pre-installed TeamViewer software, the possibility is offered to access almost all PLC systems anytime and anywhere. The module IBH Link IoT together with TeamViewer allows easy access to controllers and their programming. It is a compact device for DIN rail mounting with four Ethernet ports and a 24V power supply. With the newly developed gateway IBH Link IoT and the pre-installed TeamViewer software, the possibility is offered to access almost all PLC systems anytime and anywhere. Complex modem solutions or the use of a PC on site are a thing of the past.

Movicon.NExT ™ 4.0 is the new industrial software platform that offers the most innovative and flexible software technologies for Windows/Linux HMI projects, for SCADA supervisors and for efficiency and MES analysis solutions, indispensable for Industry 4.0. Progea SCADA/HMI/MES platform has evolved to integrate even more User Experience and User Interface, focusing strongly on these four aspects: Flexibility – a new SVG and WebHMI Web Client technology, an enhanced FBD Editor has been integrated and the NExT Project Builder has been extended. Usability – the Workspace has been streamlined, becoming more intuitive, easier to navigate, more customizable. The automation of the project Wizard has been improved, as well as the Help, revised and expanded. A new Cross-Reference. Security– new features have been added to the User Management and the ClickOnce Setup is still present in the new version.