FPJF W 550E HIGH LIFT

ELECTRICAL ELEVATOR WITH FRONT TIPPING BY 85° FPLTM10E The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. Equipped with sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors. OPERATION: After braking the wheels, for lifting it is sufficient to press the button on the rudder which regulates the ascent and descent of the forks. The tilting is done by pressing the buttonhole located on the rudder, the UP button tilts the load to the operator, while the DOWN button will lower it again.

FPGS PRO MANUAL QUICK LIFT PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. The "Quick Lift" function allows you to lift loads quickly, thanks to the specific hydraulic pump. Two pump strokes allow you to lift loads up to 120 kg from the ground or three pump strokes for loads over 120 kg, compared to 5 pump strokes with a hand pallet truck equipped with a standard pump. Available in the following models: Pallet truck with forks mm 1150x525 with single roller Pallet truck with forks mm 1150x525 with double roller The FPGS PRO 2500 models are equipped with a double or single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings. Powder coating dried at a temperature of 250 °C to ensure maximum resistance to wear and atmospheric agents.

ELEVATOR WITH MANUAL TIPPING FRONT A 85° FPLTM10M The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. The trolley is equipped with a lever valve with two positions (lifting and tilting) Placing the lever on the lifting forks are raised horizontally up to 285 mm. from the floor, by positioning the lever on the opposite side starts tilting gradual up to a maximum of 85 °. Sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors.

In Europe,50% pallets are under 300kg weight. To replace hydraulic pallet truck when under 300kg load. Pallets are simply lifted by pulling the handle backwards (the leverage principle). Saves a lot of time as no pumping is required. It differs from standard pallet trucks as completely mechanical and devoid of hydraulic system. Thanks to the low weight, the mechanic lifter can easily be carried to other floors, put into a truck or a car. Foldable.when not in use, it can be hung up on a hook on the wall. No hydraulic pump to repair, no oil can leak out,no seals to replace. Ideal for grocery stores, all kind of small stores, pharmaceutical industry, drugstores, offices, schools, hospitals etc.