Linear Unit

Very compact and economical linear guide unit for ISO 21287 cylinder Ø25 to 50 (cylinder not supplied). Access to the lateral sensor grooves of the cylinder. Short guide on bronze bearings, ball bushings or polymer bearings. Ideal for compact guided cylinder applications while retaining an ISO cylinder. 2 ranges of linear guide units for ISO 21287 cylinder Depending on the stroke and the lateral forces, 2 ranges are available to guide the rod of ISO 21287 cylinders. . 34*EC series is the most compact version, with a rigid connection of the cylinder rod directly screwed into the front plate. This model is therefore limited to cylinders with stroke up to 50 mm. . 34*EF series has a floating rod coupling between the cylinder rod and the front plate. This model can receive cylinders with a longer stroke (100 mm maximum recommended). ISO 21287 cylinder with guide unit or compact guided cylinder ? It’s more advantageous to use an ISO 21287 cylinder and a 34*EC series guide unit

Compact and economical linear guide unit for ISO 15552 cylinder Ø32 to 50. Short guide on bronze bearings, ball bushings or polymer bearings. Competitiveness of guide units for ISO 15552 cylinders This range is very competitive since it is 25% less expensive than a HGuide Classic Series 20% less expensive than a UGuide Classic Series 10% less expensive than a UGuide Light Series (comparison made on size 4 – for cylinder Ø32) Area of application of compact guide units These compact guides being available in ball bushings whereas all the Uguide units are generally available in plain bearings only, they are particularly interesting for simple applications at high speed like in packaging machines. It will also be used in tight spaces, but for short strokes (<100 mm), it may be advisable to use a compact cylinder ISO 21287 with the guides

Pneumatic manipulator for handling drived by ISO pneumatic cylinder. Guided by 2 rods on ball bushings and end stroke adjustable by mechanical stops. Hydraulic shock absorbers, inductive sensors and flow limitation are supplied. Pneumatic pick and place and 3 axes handling systems The combination of 2 pneumatic manipulators makes it possible to create pick & place (XZ manipulators) for assembly, loading, packaging machines … By combining them with gantries it’s possible to realize 3axis cartesian pneumatic manipulators. Equipped with hydraulic dampers, inductive sensors and flow limiters, these manipulators are ready to be installed and wired. Optimized end of stroke adjustments The fine adjustment of the stroke is done by mechanical stops without any intervention on the hydraulic dampers and the inductive detectors this saves time, guarantees the reliability of the adjustment and ensures an optimal lifetime of these components.

Guide units for pneumatic cylinders ISO Ø20 to Ø50 For other cylinders (not standardized) Complete guide units, or subsets (bearings, guide rods, rod couplings) to realize a guide adapted to your need and integrated to your machine Materials used in stainless steel guides These guide units are made of 304L stainless steel for environments requiring anticorrosion and resistance to certain aggressive agents.. The scrapers are in thermopolyurethane FDA approved. Polymer bearings are in Iglidur J (dry using) Bronze bearings are impregnated with oil (oil compatible with food processing areas) The ball bushings can be with FDA grease (contact us) Precautions for use in the food industry Despite the materials used, these units cannot however be used in the direct food zone without precaution (in contact with or above food), since there is a retention zone at the level of the rod coupling and that particles or drops may ooze from the guide bearings.