Makonat

SPRINT PLUS is a lightweight gypsum-based machine plaster for one-layer application on interior walls and ceilings in premises with normal humidity. Lighter formula with perlitе ensuring fast laying and economical consumption. Application: • Surfaces that are ready for painting, laying wallpaper or proper decorative plasters and finishing skim coats • Perfect for laying on oven and red bricks, cement and lime-sand blocks, roughened concrete • Suitable for all types of machines for fine plasters Advantages: • If processed with a water scraper, high smoothness is achieved and there is no need for additional skim coating • High content of gypsum for maximum elasticity TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type B4/50/2 • Paper bag: 30 kg • Mixing Ratio: ~ 18 l water: 30 kg • Coverage: ~ 3.5 m²/ 30 kg • Consumption: ~ 8.5 kg/m²/10 mm • Bond strength: 0.15 MPa • Bags per pallet: 40 pcs • Pallet weight: 1200kg

2500*1200 12,5 MM GREEN PLASTERBOARD

AGRANA starch ethers are used in gypsum, slaked lime, cement and slaked cement to rapidly and reliably ensure the desired product consistency.

TECHNICAL DEFINITION Ready-to-use coating paste coating specially formulated for use on tapered-edge plasterboard joints, to be used with jointing tape. The coating comes mixed : it is suitable for gluing and finishing the tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, preservatives and various additives. The paste is white in colour. TECHNICAL CHARACTERISTICS Cracking : Up to 5mm thickness with no cracking. APPLICATION Application is carried out manually, spreading the thinned the product with a coating knife across 10 or 15 cm, before laying the tape in position. In the event of projecting vertical angles, use reinforced tape (frame placed at the side of the panel). Apply tape to the internal ceiling corners, making sure that the concrete is free of any trace of forming oil. The surface must be dry and free of any type of powder or insufficiently adherent product.