PROPACK DICHTUNGEN UND PACKUNGEN AG

Profile gaskets and Special solutions, Expansion joints Characteristics Perfect axial and radial flexibility, good stress relaxation and protection against wear Very low leakage values through outstanding cross section and surface density. Without organic carrier fibers, no shrinkage under temperature Resistant against gases, vapours, oils, caustics and most of acids, also suitable for NH3 - gases, hydrogen, nitrogen and methanol Non hazardous to health (no Al2O3 content !) A specific vulcanisation technique for temperingsystem applications simplifies the installation and improves adaption to uneveness Main application Developed for highest thermal and mechanical strains, particularly proven in heat treatment systems, door and cover washers in foundries, power plants. Construction Wrapped gaskets from texturised glass cloth with high temperature resistant, gas proof elastomeric binders. Standard: Graphitised nonstick Coating Special: Raw, elastomercoated or PTFE impregnated...

No irritation to skin, harmless to health (filament diameter: 6 - 10 ) Non flammable following DIN 4102 – ignition loss <1.5 % Resistant against oils, grease, steam, solvents and organic acids Hydrolytic resistance following DIN 12111: Class 1 Does not content toxic substances or heavy metals Surface graphite impregnation on request for increasing compactness and nonstick effect A variety of products different in form and temperature resistance are available on request Technical parameters pH 3 - 9 Temperature: t = -100 … +550 °C Main application Furnace, boiler, vessel and chimney doors Fireplaces Pressureless service closures Tunnel furnaces Lid seals etc. Suitable for Power plant Furnace construction

Non flamable High electric- and thermal isolation capability Dimensionally stabil Good mechanical structural strength Technical parameters pH 3 - 9 Temperature: t = -100 … +700 °C, short term up to 800 °C Main application Furnace, boiler and chimney doors Expansion joints Exhaust pipes Suitable for Power plant Furnace construction

High elasticity and volume are the premises for an extremely good insulation effect Resistant against acid and caustic except phosphoric or hydrofluoric acid or highly concentrated caustics Does not content toxic substances or heavy metals Non flammable following DIN 4102 Product availability: Square, rectangular, round braid or round twisted reinforced with chrome steel wire Surface graphite impregnation on request for increasing compactness and nonstick effect Product contains approx. 20 % organic carrierfiber which decomposes at 200 °C. Technical parameters pH 1 - 13 Temperature: t = -100 … +1100 °C Main application Furnace, boiler, vessel and chimney doors Fireplaces Pressureless service closures Tunnel furnaces Boiler and vessel doors Lid seals etc. Suitable for Power plant Furnace construction Variants Square, rectangular, round braid or round twisted reinforced with chrome steel wire On request with surface graphite impregnation...

PROCONTROL Precise metering and constant pressure of sealing water (p = 1 bar above media pressure) - environmental protection and cost reduction in fact of reduced seal water consumption Flow and pressure monitoring - protects the aggregate from failing (inductive alarm system) Stable and compact construction guarantees safety and simple handling Corrosion and temperature resistant Displays are easy to read and clean With an inductive switch (special component) alarm system can be used. Technical parameters Flow range 0.5 up to 1.5 ltr/min 0.5 up to 3.0 ltr/min 1.0 up to 8.0 ltr/min 2.0 up to 15.0 ltr/min Temperature: t = … +80 °C Pressure: p = 10 bar (Option 25) Main application Pumps with mechanical seals with flush port Stuffing box packings with lantern rings Suitable for All Industries Accessories and options Pressure valve for creating blocking pressure Pressure Gauge Stand Inductive switch Hoses, connecting...

Economical storage independent from shaft diameter, follow the packing diameter by 1.2 m-pieces Replacement for machined lantern rings Universal use, excellent chemical and thermal resistance Easy to remove with packing extractor No corrosion and wear of shafts, no canting during use Technical parameters Temperature: t = -100 … +250 °C pH 0 - 14 Main application Pumps with mechanical seals with flush port Stuffing box packings with lantern rings Suitable for All Industries Approvals FDA conformity Form of delivery 1.2 m per roll, special length 2 m on request Special sizes on request Packing dimension The hight of the lantern ring depends on the size of packing (see chart). Article (Lanternring) Height x width [mm] Height x width [imp.] STAR-AQUA BLUE 8 mm 7.6 x 11.4 0.30 x 0.45 STAR-AQUA BLUE 3/8" 9.0 x 13.2 0.35 x 0.52 STAR-AQUA BLUE 10 mm 9.4 x 13.2 0.37 x 0.52 STAR-AQUA BLUE 7/16" 10.5 x 14.3 0.41 x 0.56 STAR-AQUA BLUE 12 mm 11.1 x...

(ePTFE) Characteristics High density and strength properties HD Tape plies during the wrapping in the thread and forms a dense PTFE film, which does not harden and stays flexible Immediate after connection of the construction parts it is possible to turn them 45° back for alignment. Chemically inert and does not react with steam, water, fuel, acids, gases or solvents. Once applied the connection can be disassembled Fretting of the threads is practically impossible Technical parameters Temperature: t = -240 … +260 °C Pressure: p = Vacuum up to +170 bar pH 0 - 14 Physical properties Color: bright yellow Thickness: 0.1 mm Area weight: 125 g/m Classification: GRp Tension strength: 9 - 14 MPa Nominal width: 10 < DN < 50 Main application For sealing all kind of thread connections as per ISO 7-1, classification GRp, with possibility of limited reverse rotation of conical/cylindrical (R/Rp) threaded connections Pipe connections in...

Compact and wear resistant tool made of aluminium. Advantages Packing cut without necessary length calculation (an adder-factor x - is already included) Time saving Repeatable results No waste Suitable as well for Trapez-Pack Technical data For shaft diameter up to 80 mm with W5PS-SK and 110 mm with W5PS-BU With extension W5PS-V-SK to 200 mm and W5PS-V-BU to 250 mm shaft diameter Scale: in inches and mm Packing sizes: from 3 to 25 mm Spare parts available Variants 45° skive cut type W5PS-SK 75° Butt cut type W5PS-BU Accessories Extension W5PS-V-SK Extension W5PS-V-BU Spare knife

Simple Stuffing Box Packing Cutter for soft and medium-hard packing types. For 45° skive cut and 75° butt cut. Characteristics Quick change of cutting angle due to adjustable support. Easy handling due to precise angle cutting aligned to marks on the packing. Replacement blades available

Excellent spot drilling and extracting of old and hardened packings as well as blocked and difficult locations. Construction These Packing Extractors have a flexible nontorsionshaft with a tightly bound screw tap nose which is either a sharp screw head W2S or a helical screw head W2W. Ausführung Special version in other length or with a wooden screwdriver handle is available. Standard Versions Type Sharp Screw Head flexible shaft Packing size W2S04 4 mm 100 mm 5 mm W2S06 6 mm 160 mm 8 mm W2S08 8 mm 200 mm 10 mm W2S10 10 mm 260 mm 14 mm View details