ROTHBUCHER SYSTEME

Datum Markers RS10 & RS11 self-adhesive Datum Markers RS20 & RS21 self-adhesive For construction sites without plastering work For ensuring the surveyed measurements are securely marked For ensuring heights and finished floor level (FFL) in door and window frames are securely marked For ensuring axes are securely marked Mounted in the formwork with negative impression in the concrete for axes and heights The RS10 & RS11 Datum Markers are also available in red without the inscription “Meterriss”. Article no. RS10r oM. and RS11r oM. For permanently ensuring the surveyed measurements are securely marked until after plastering work For ensuring heights and finished floor level (FFL) are securely marked until after plastering For ensuring axes are securely marked until after plastering The RS20 & RS21 Datum Markers are also available in red without the inscription “Meterriss”. Article no. RS20r oM. and RS21r oM. Datum Markers RS20 and RS21 after plastering work, the uppe

Smart Targets RS30 & RS31, self-adhesive Smart Targets RS40 & RS41, self-adhesive For quick positioning using the tachymeter and all common measuring instruments The surveyor’s measuring stick can be attached for measuring subsidence For bridge and tunnel construction For measuring and monitoring façades For industrial construction and hall construction For production lines For ensuring heights and axes are securely marked Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective target is damaged at any point, it can easily be replaced and the original survey point can be restored quickly, easily and cheaply. Can be mounted even on difficult surfaces For ensuring heights and axes are securely marked For industrial construction and hall construction For production lines The surveyor’s measuring stick can be attached for measuring subsidence Tempera

RS50/51, RS60/61, RS70/71

Smart Targets RSAKZ6 Smart Targets RSALU22 RSAKZ6: carrier plate for 60 x 60 mm target reflector Range from 10 m to 120 m Temperature and UV-resistant Can be mounted even on difficult surfaces The RSALU22 markers were specially developed for long distance measurements Range 400 m - 500 m The shape of the crosshairs enables exact bearings to be taken from long distances To secure the survey point for a longer period, markings were applied to the carrier plates so that any damaged reflective target can easily be replaced and the original measuring point can be restored quickly, easily and cheaply. Please note: Survey markers with reflective targets are exclusively recommended for carrying out distance measurements using a tachymeter or total station. Survey markers with crosshairs, and without reflective targets, are available for the use of levelling instruments, theodolites and construction lasers.

Smart Angle Targets

Angled Plastic Adapters RSAK80 and RSAK130 Unmistakable survey points 3-dimensional monitoring of bridges Roads no longer need to be closed or obstacles crossed as every measuring point can be checked from a distance of up to 200m, range depends on the measurement equipment Simple and quick measurement and monitoring of buildings, façades, supporting structures, pillars, high rack storage facilities, dams and many other objects requiring monitoring For monitoring the formwork during concrete pouring, e.g. for bridge arches, single-faced wall formwork For monitoring railway tracks where there is surrounding building work e.g. bridge and tunnel construction, pressure grouting of railway lines, etc. Measurements and monitoring are possible from virtually any angle and at locations which are difficult to access The RSMP15 adapter with a 12.7 mm mini prism is used for all the applications referred to above if measurements using a prism are desired or necessary Temperature and UV-resistant

Adapter RSAM80 & RSAMG80 Bridge construction and bridge monitoring Tunnel construction Earth and rock monitoring – e.g. steeply upwards or along the slope Enables measurements and monitoring from virtually any angle, where space is tight and on hard-to-reach areas The clip system allows the original measurement point to be restored both quickly and cheaply in the event of damage. Many measurements can be carried out within a short time when used with up-to-date total stations. Drilling is no longer required as pre-installed anchor sleeves for Dw15 threads can be used for mounting Anchor sleeves can be installed during the construction phase for survey points, e.g. above and below the bridge support, in the case of retaining structures and in many more applications. Material: Stainless steel V4A Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective t

Reflective targets RSZ2, RSZ3, RSZ4, RSZ6 and RSZ22 Dimensions and ranges: Reflective targets 20 x 20 mm -> range approx. 50 m Reflective targets 30 x 30 mm -> range approx. 80 m Reflective targets 40 x 40 mm -> range approx. 100 m Reflective targets 60 x 60 mm -> range approx. 120 m Reflective targets 220 x 220 mm -> range approx. 500 m The ranges are average values and are exceeded by most current measuring instruments. A minimum distance of 10 m is required for some instruments. Safety Data Sheet

RS183 Plastic housing with 30 x 30 mm reflective target can be rotated through 180° and combined with other RS183! RS183 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, rails, gas and oil pipelines, etc. or can be attached using plugs and screws.. When using tachymeters and robotic total stations the reflective target can always be aligned accurately with the measuring instrument the reflective target can be turned in a radius of 180° making it possible to use the same survey point from different directions several reflective targets can be combined with each other due to the integrated connector system, making it possible to survey from different directions without having to turn the target – see examples

RS193 housing with 30 x 30 mm reflective target rotatable and swivellable through 360°! RS193 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, gas and oil pipelines, etc. or can be attached using plugs and screws. For easy installation on steel structures, a magnetic version of the base plates is also available. The following accessories are available for this product (see right): Resumption points (item RSFP-X90) Magnetic or non-magnetic protective cap (RSPC10 and RSPC10M) When using tachymeters and robotic total stations the reflective target can always be aligned accurately with the measuring instrument the reflective target can be turned in a radius of 360° making it possible to use the same survey point from all directions when using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point when using protective cap RSPC10 and RSPC10M, the reflective targets can be protec