Silicone tubing - Import export

Silicone tubes are used for the vacuum channels.

The 1M micro connector was developed especially for medical, pharmaceutical and analytical technology. It provides ideal connection features for PFA, silicon or Tygon® flexible tubes. The micro connector consists of a connector body with integrated conical connecting sleeve, a knurled nut for fixing the flexible tube and a slotted pressure ring. The pressure ring can be omitted for PFA flexible tubes.

Ceramic Si3N4 Silicon Nitride Tube Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

The protective tube of silicon nitride material has high thermal conductivity, high temperature resistance, corrosion resistance,non-wetting with molten metal, and electrical insulation, making it the best choice for heating body protection tubes. The advantage of the immersion holding furnace is very obvious, and in order to achieve the immersion of the heating element into the molten metal, it is necessary to have a protective tube which can protect the heating element well. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +180 °C, continuous Wire type: Silicone, Tmax: +180 °C, continuous

Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, the high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides, and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. When extreme conditions like these push equipment to its limits, Silicon Nitride (Si3N4) industrial ceramics deliver high performance where other materials fail. Typically, Heavy-duty diesel engines. Jet engine igniters. Oil wells thousands of feet underground. Applications for silicon nitride include: Foundries Electronics Oil & Gas Automotive Aerospace

The tubing specialist with unique precision and working speed for very thin, tension-elastic and pressure-sensitive materials. KL-BV is available in the equipment line Green and as KL-BV Gasket. The Metzner KL-BV cutting machine stands out for its precision, compact design, and the wide range of processing options such as silicone tubes, flexible profiles and gaskets. KL-BV GASKET With its particularly thin blades and precision feed, the KL-BV Gasket is ideal for cutting flat gaskets with a diameter of up to 12 mm.

Metzner has been developing and designing production machinery for tube machining for nearly three decades. Thanks to these many years of experience, today we can offer solutions that are adapted to the variety of different tube diameters and material properties. Wherever tubes have to be cut in very large quantities, impact knife machines are used. The Metzner Dynamat series achieves up to 4000 cuts per minute with one knife and, if required, an even higher cutting performance with multiple knives. Customers have the choice between "stop & go" cut or continuous cut. There are different machine sizes for materials of up to 120 mm diameter, which are prepared as standard for a wide range of peripheral equipment and knife moistening. The Dynamat machines process elastic materials reliably and with repetitive accuracy – from silicone tubes for the medical sector to fabric-reinforced tubes and profiles. No difference whether the material comes from an extruder or is unwound from a coil.

Heat conductive ePTFE Yarn, PTFE fiber, Run-In Lubricant and elastic Silicon Tube Core Practical useful application data: max. temperature: +160 °C Characteristics Elevated heat conductivity For higher shaft speeds than S 6 SKV High chemical resistance and for clean media Operating range Pressure [p max]: 20 bar, Velocity [v max]: 10 m/s Temperature: t = -100… +280 °C pH: 1 - 14 Density: 1.60 g/cm³ Practical useful application data: max. temperature: +160 °C Main application Mixer Agitators Autoclave Kneader Paddle dryer Suitable for Rotating Equipment with higher surface speed radial run out Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.2 15 2.8 16 [5/8"] 2.4 18 1.9 19 [3/4"]...

Description SİBAX Transparent Silicone is a fast-curing, flexible and general-use acetoxy-based filling agent used in general insulation, assembling and filling procedures. The agent ensures perfect bonding to glass, glazed surfaces, metals, plastic varieties and coated surfaces. Features - No overcoat of paint - Elasticity at the temperature range of -20oC to 100oC - Resistance to diluted acids and bases Fields of Application Bonding to glass, glazed surfaces, metals, plastic varieties and coated surfaces; filling and bonding ceramics, tiles and other structural members; insulating electrical and electronic circuits; isolating sound, water and dust in road and marine vehiclesMethod of Application Ensure that application surfaces are dry and cleared from grease and dust. Smooth sprayed silicone surface within 5 minutes by means of a spatula or wet sponge. If necessary, tape both filling surfaces for a smoother application. Once hardening is complete,

The Clippard NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid. Energizing the solenoid retracts or attracts the plunger, which opens or closes the tube. De-energizing the solenoid will allow the plunger to return to its original state. Features: • Small, compact design • Hygienic and easy to clean (replace tubes) • Low power consumption • High cycle life • Can handle whole blood and particulate matter • Unobstructed flow path • Each valve comes with 12" of silicone tubing • Variety of tubing sizes available • Tubing is easily replaceable Available in 2-Way Normally-Open or Normally- Closed or 3-Way ( one tube N.O. and one tube N.C.) configurations

Characteristics of high speed door for cold room Mavicold Supple folding system for cold room EN 13241-1 safety Standard – EC Self supporting mill galvanised steel frame with polyester powder coated finish – No welding Option Frame : stainless steel 304 L – Stainless steel 316 L Heating system with airtight, watertight, dustproof silicone cables in a tube spreading heat Peripheral isolating foam between structure and wall Double fabric including thermo-reflective aluminium films in between which are caught air bubbles and isolating cushion Curtain with composite strengthening tubes and seamless safety straps Special low temperature oil – stainless steel brake – Opening: 1 m/s – closing: 0.5 m/s Maximum clear opening dimensions in mm : W 4000 x H 4000 Automatic door >> High speed door for cold room

We carry various PVC hoses, silicone-free, various Shore hardnesses and winding strengths. You will receive yard ware or lengths on request from us. We would be pleased to mount the hoses on the corresponding product. Antistatic versions are also available. Hoses sample (more hoses for tube-ø: 20-108 mm on stock) PVC 54x2 PVC hose (silicone-free) For tube ø: 60 mm Shore hardness: approx. 58° (+/- 3 Shore) Colour: light grey PVC 45x2 PVC hose (silicone-free) For tube ø: 50 mm Shore hardness: approx. 58° (+/- 3 Shore) Colour: light grey