12V 100Ah LiFePO4 Battery Pack Perfect 12 Volt for Marine Environment Electric Boat 12 Volt 100AH LiFePO4 Battery batterie lithium 12v 100ah specification: No. Item General Parameter Remark 1 Rated Capacity 100.0Ah Standard discharge(0.2 C5)after standard charge(0.2 C5) 2 Minimal Rated Capacity 95.0Ah 3 Nominal Voltage 12.8V 4 Cycle Life Higher than 60% of the Initial Capacity of the Cells Charge: CC 0.2C to 14.6V, then CV till current to 0.05C Rest: 30min. Discharge: 0.2C to 10.0V Temperature:20±5℃ Carry out 2000cycles 5 Discharge cut-off voltage 10.0V 10.0V( recommended) Charging cut-off voltage 14.8V 14.6V (recommended) 7 Standard charge 0.2C constant current(CC) charge to 14.6V,then constant voltage (CV)14.6V charge till charge current decline to ≤0.05C Charge time : Approx 7h 8 Standard discharge Constant current 0.2C Cut-off voltage 10.0V 9 Maximum Charge Current 100A 10 Continuous Discharge Current 200A Over current 100±5A 9
China
Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.
Request for a quoteGermany
• With protection cap • With straight, half-round polished blade for plastic cables • With fixed blade • Ergonomically designed multi-component safety handle made of tough elastic, impact-resistant plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Blade made of stainless steel, hardened
Request for a quoteItaly
The vetronites may contain epoxy, polyester, melamine and silicone resins with different thermal class depending on the model chosen. They have excellent mechanical and dielectric characteristics and are suitable for use in many sectors and are the excellence for the electromechanical sector. It should be noted that FR4, GPO3 and FR5 glass elements are self-extinguishing according to the UL 94 V0 standard. The GPO3 and FR5 material are also non-marking and halogen-free. The GPO3 material is a layered insulation based on glass mat and filled polyester resin and is used for machined and sheared pieces. It has good mechanical properties and is suitable for blanking up to 6mm thick. It has good dielectric properties. The FR4, G11 and FR5 laminates are layered with a glass fabric and epoxy resin base. They have different thermal classes. LG11 material exists in two versions: - Insulation class F (155 ° C), code LG11 - Insulation class H (180 ° C), code LG11H
Request for a quoteFrance
highvoltage transformer stations, stations which require people to be isolated against electric shock from certain devices such as electrical cabinets, etc. Environment: dry Advantages: light thanks to its low thickness conforms to IEC 6 11 11 Standard good abrasion resistance antislip easy to clean
Request for a quoteCreate one request and get multiple quotes form verified suppliers.