ABES S.À R.L. PUBLIC DESIGN -

ABES Waste-Container 529 (75 liters) / 530 (50 liters) is a cylindrical steel waste container with O-shaped, horizontal slot area and separate cigarette slot. The container comes with an assembled bollard. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Stainless steel 1.4301 (529 only), pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Other colours available on request at a surcharge. – Cigarette slot: Stainless steel 1.4301. – Incl. internal container. – May be unlocked for emptying using a triangular key.

ABES Bollard 002 is a bollard made from cast aluminium with a triangular base and a sphere set on top. The bollard tapers towards its center. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Powder coating in standard RAL colours or DB 703. Note The surface is not as smooth as that of a stainless steel tube. The basic package for ABES Bollard 002 with 3p-Technology contains: – The bollard, cast aluminium, powder coated in RAL, DB 703 Glimmer grey – Measurements (H above the ground x Ø in mm): 820 x 140 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)

ABES Bollard 001 is a cylindrical bollard with ten circumferential grooves and a conical base. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Powder coating in standard RAL colours or DB 703. – Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge. Delivery: – The bollard, cast aluminium, powder coated in RAL or DB 703 Glimmer grey – Measurements (H above the ground x Ø in mm): 870 x 85/120 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)

ABES Planter 720 / 721 is a plant pot with square / oblong basic shape and vertical side walls. Openings are countersunk in the base and closed with a perforated sheet metal cover. The container stands on four individual feet made from square tubes. Mounting Free standing element. Finish – Aluminum with powder coating in standard RAL colours or DB 703. – Containers are also available without legs and with welded frames for chain suspension upon request. ABES Planter 720 (square base) Square planter – Measurements (L x W x H in mm): 700 x 700 x 700. – Height including feet: 810 mm. – including Drainage holes. ABES Planter 721 (rectangular base) – Measurements (L x W x H in mm): 1000 x 700 x 700 – Height including feet: 810 mm – including Drainage holes

THE BBQ SEASON IS OPENED! ABES Fire basket 935 is a customisable fireplace made from non-galvanised sheet steel with three welded feet and capacity of approx. 50 L. Suitable as a simple fireplace or grill for all kinds of occasions. Customised laser cuts at the top, middle and case ensure diverse designs, and make the basket unique. Names, emblems, symbols, personal dedications or URLs are possible. The holes in the upper area may be used for spits. Accessories such as a cooking grate and a soil protection are sold separately. Details: Free-standing Fire-Basket with three feet. – Capacity: approx. 50 Liters. – Material: Steel, non-galvanized. Predefined and custom laser cuttings at your choice: – without laser cuttings – with flame – with flame + name – 1 preferred laser cutting – 2 preferred laser cuttings Available accessories: Cooking grate Soil protection

U-rack made from perpendicular steel profiles with an integrated LED bar unterneath the crossbar. Other dimensions are available upon request. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. Overview: Bicycle Stand, stainless steel, galvanised steel or powder coated – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm – LED-bar (approx. 24,5 x 770 mm) – Power supply: 24 V DC – Power input: approx. 6,7 W – Luminous flux: approx. 560 lm – Reflected beam angle: 120° – Light colour: 4000 K – Light transmission: CRI >80 – Protection type: IP 67 – Connection cable: approx. 1 m with IP 67 plug The Connection, including all technical requirements, is delivered by the client and is not included in this package.

ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter

ABES Bicycle-Stand 472 is a bike rail with knee rail and rounded edges made from 80 x 10 mm bent flat steel. Additional material thicknesses, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Bicycle-Stand 472 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 80 x 10 mm – Height above ground: 850 mm – Full height: 1100 mm – Width: 800 mm

ABES Lighting-Bollard 200 (LED) is a cylindrical and removable stainless-steel bollard. With satined or clear acryl glass. Reflective slats surround the light unit. With standard lighting or LED technology. Mounting Removable with 3p-Technology, comprising a 300 mm ground shell, junction piece with pre-determined breaking point, anti-roll device and cable slot, 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard. Alternative: Fixed Mounting (screw on). Finish – Stainless steel 1.4301 pickled and smoothed. – Powder coating in standard RAL colours or DB 703. – Available with satined or clear acryl glass and 8 reflective slats. – Lower fitting: hexagon shell safety screws with pin, incl. key. – Protection class 1, protection type IP 54. Lighting units – Osram Dulux TC-DEL, 13 Watt, 230 Volt AC, 900 lm, 830 K – LED stick with 3 x 3 LEDs, 9 Watt, 230 Volt AC, 1000 lm, 3000 K

ABES Bollard 006-2 is a bollard made from cast aluminium tapering towards its middle. Mounting Removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Powder coating in standard RAL colours or DB 703. The basic package for ABES Bollard 006-2 with 3p-Technology contains: – The bollard, cast aluminium, powder coated in RAL, DB 703 Glimmer grey – Measurements (H above the ground x Ø in mm): 870 x 95/120 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)