Adjustable Torque Wrench with Reversible Ratchet Basic click type torque wrench for various tightening applications. Its 24 teeth ratchet with 15 degree operating range allows usage in space-limited working conditions. A clear "click" sound by internal toggle mechanism signals tightening completion upon reaching the set torque. Torque setting is easy to adjust by knob and scale. The lock-structure has been newly-developed. It assures operation in secure, and set-torque remains solidly. The ergonomic resin handle not only covers the large and easy to read scale but it also reduces operators fatigue. Via optional color caps differently set wrenches can be identified at a glance. Key Features: - Accuracy and calibration procedures compliant to ISO 6789 type II class A - Reversible Ratchet with 24 teeth and 15° operating range - Improved adjusting and lock mechanism - New designed ergonomic resin handle - Large-size memory scale - Traceable calibration cert (JCSS) incl.
Germany
Pokayoke torque wrench with limit switch output to eliminate missed tightening Adjustable clicker type torque wrench with limit switch output and durable curly cord. Upon reaching the set torque, the torque wrench "clicks" to complete tightening while the limit switch simultaneously sends out a contact signal. Signals from a limit switch are captured on a programmable logic controller (PLC) or similar device to establish a Tightening Assurance System using assembly line interlock controls. Torque setting is easy to adjust by knob and scale. The ratchet head has 24 teeth with a 15 degree operating range, allowing for use in space-limited working conditions. A clear “click” sound signals tightening completion upon reaching the set torque. Metal handle version (-MH) especially suitable for use in greasy conditions (oil, chemicals, etc.) such as garage work. Large adjusting knob designed to enhance usability in torque setting by oily hands. [...]
Request for a quoteGermany
Colour Marking Preset Torque Wrench for Cap Screw Tightening. A mark is made on the tightened cap screw and an adjacent location on your work. This lets you check for subsequent loosening. A marking torque wrench for tightening cap screws, which prevents human tightening errors. Upon reaching the set torque the marker is designed to stamp on the bolt and work. Because the stamped mark is put on the side of the bolt and the work piece, it can not only prevent missed tightening but also detect loosening of bolts. The marker is designed to stamp only when the torque wrench operates upon reaching the set torque. Marking stays on by use of quick dry ink. One refill of ink is capable of approximately 3,000 times of stamping. Marker is ink cartridge type. Only hand force required for tightening a bolt and marking the bolt simultaneously. Applicable for international use including the EU region. Compliant with ISO 6789 Type II Class B calibration procedures. [...]
Request for a quoteGermany
Ideal for tightening verification assembly processes. Pokayoke (error-proofing) marking torque wrench. Lets you make direct visual checks for bolt tightening errors. When the adjusted torque value is reached and the wrench clicks, the bolt head is marked. So tightening and marking is done in a single operation. Marking is not done until set torque is achieved. Marking stays on by use of quick dry ink. Ink cartridges can easily be installed in the special socket wrench. One cartridge filling is sufficient for appr 3000-5000 stamping processes. Height of the stamp is adjustable (±5 mm). Setting torque can be operated by an attached hex key to avoid torque change by human mistake. The set torque is visible via a small scale window in the handle. The torque adjustment hex key is a standard accessory. Version MPQL: Pre-Lock type with scale; allows adjustments of the tightening torque on the tool. The set torque is visible via a small scale window in the handle.
Request for a quoteGermany
Error-proofing (PokaYoke) torque screwdriver with limit switch output to eliminate missed tightening. Ideal for assembly processes with torque monitoring. After reaching the set torque, the limit switch transmits a trigger signal. This can be picked up by means of a PLC, for example. At the same time, the slip clutch is activated, making over-torque impossible. Series RTDLS are adjustable models. Along the micrometer scale, the desired torque can be easily and quickly adjusted. A locking mechanism prevents unintentional torque adjustment during use. Series RNTDLS are fixed models without scale and are particularly suitable for repetitive tightening operations at the same torque. An additional auxiliary tool (sold separately) is available for each of the 500 cNm models for easier power transmission. For counting tightening operations, the LS screwdriver can be connected to an optional 'CNA-4mk3', for example. [...]
Request for a quote