BAUMAK LLC - BAUMAK. BEST FOR BUILD

Push-pull props are used to mount and fix formwork panels in a vertical position.The use of push-pull props guarantees good protection of the formwork. Also, fixing in more than one place makes it possible to mount the formwork panels in the desired location.Push-pull prop can be connected to the formwork panel at a height from two to four meters, depending on modifications. The use of push-pull props facilitate the installation of elements of the formwork system and ensure the stability of the structure in wind conditions and also make the construction more spatially rigid. The following specifications are available: Push-Pull Prop: nominal length of the upper jack 1950-2550 mm, nominal length of the lower jack 1150-1750 mm, length adjustment: screw, weight 20,6 kg

Guard Rail Post prevents falling at the border of the height difference on construction sites. It is made of a 50*25*1.5 mm shaped pipe with powder coating and has a convenient screw fastener. Multiple use is possible. The following specifications are available: Guard Rail Post SZO-1: height 1000 mm, number of railings: 2, working width 70-310 mm, mount: internal Guard Rail Post SZO-2: height 1000 mm, number of railings: 2, working width 70-310 mm, mount: external

Film-faced plywood is produced under our own SUNBIRCH brand and is made from birch veneer. It has high strength and hardness, resistance to bending, deformation, fracture, reinforced steam and moisture resistance. Heat resistance is to temperature differences from -30°C to +40°C. Our plywood is highly resistant to aggressive chemicals, cement and sodium hydroxide. Perfect smoothness of the film reduces the adhesion of plywood to concrete which allows multiple use. Enhanced wear resistance is another advantage. The edges are treated with water-resistant acrylic paint. The following specifications are available: STANDART: size 1220*2440*18 mm, grade I/II, film density 125 g/m2 STANDART+: size 1220*2440*18 mm, grade I/I, film density 125 g/m2 STANDART: size 1220*2440*21 mm, grade I/II, film density 125 g/m2 STANDART+: size 1220*2440*21 mm, grade I/I, film density 125 g/m2

The Cuplock system is a complete system that provides access scaffolding and formwork slab support. Cuplock system is assembled from vertical standards and ledgers fastened with "cups' and "blades'. It is mounted on hollow screw jack and the top of the system U Upper screw jack is mounted on. The height of the structure (height from the floor to the ceiling) on standard racks is up to 12 m. The minimum size of the section from the lower level to the boards of the formwork system is 1.5 m. All the technical parameters are given upon request according to the byuer's requirements.