BCB2002-C01

ESM for AC-brakes: The module consists of a time-controlled rectifier with integral electronic fast turn-off. During start-up, the ESM delivers bridge-rectified output voltage before changing over to half-wave rectification. The built-in voltage sensor ensures that the DC side output voltage is interrupted electronically when AC input voltage is removed. Thanks to its compact design, the ESM can be installed in very restricted space. ESM for DC-brakes: The module keeps the voltage supplied to the electromagnetic device at a constant level over a wide input voltage and temperature range. Full operating voltage is applied to ensure fast switching when the load is switched on. The module then reduces the power supply to constant holding voltage. A 30% reduction provides power savings of 50%. The ESM is very compact thanks to the use of state-of-the-art microelectronic and power electronic components. Overexcitation time and holding voltage can be factory-programmed to customer demands.

Microinverter EPP 2000W is with 4 MPPTs inputs for 1 to 4 panels. With the EPP, all 4 modules are connected separately and controlled individually. Thanks to the intelligent monitoring platform, EPP's inverter supports instantaneous remote shutdown when an accident occurs. Remote setting of parameters and FW update, which simplifies the operation and maintenance of the PV system.

The AD813ARZ-14 is a high-speed, low-power video amplifier module from Analog Devices Inc. It is designed for use in video applications such as video switching, video distribution, video signal processing, and video signal conditioning. It features a wide bandwidth of 100 MHz, a low current supply of 4.5 mA, and a slew rate of 250V/µs. It is available in a 14-SOIC package and operates over a temperature range of -40°C to 85°C.

HYT271 MK33 in a robust and compact screw-in stainless steel housing with a metric M14 thread. Ideal for test measurements in an industrial environment. Sustains -40°C to +120°C and 0 to 100%RH (water activity aw). Digital I2C interface over 0.5m cable. Compatible with HYT Test board (USB or 0 to 10V analog outputs). This functional prototype is intended for easy evaluation of oil sample compatibility. Please contact us for support during your tests and to discuss the design of an OEM sensor probe tailored to your application.