BDSENSORS GMBH - PRESSURE at the highest LEVEL.

The digital pressure gauge DL01 is a precision device fulfilling highest demands. It was conceived especially for leak testing or pipeline monitoring. The advantage of the DL01 is that it consists of two devices - the digital display and the pressure transmitter -which can be combined without any tools. Outstanding measuring qualities, an intuitive operation, as well as an integrated data logger characterize the DL01. In addition, the graphic display provides the handling and the clear presentation of the measuring procedure. Features: — nominal pressure: 0 …100 mbar up to 0 ... 400 bar — modular sensor concept — data logger — graphics-capable display — stainless steel housing d = 100 mm — communication interface USB 2.0 Optional Features: — data logger interval 1s ... 99 days or fixed time — default values for time / test duration — zero point calibration

DMP 320 stands for speed and precision. With a response time of ≤ 0.5 msec and a sampling rate of 10 kHz, the pressure transmitter was designed for applications, in which an extremely fast and exact pressure measuring is required. Pressure curves, peaks and hits can be monitored and evaluated exactly. The signal processing of the sensor signal is done by newly developed digital electronics, which detect the signal with a sampling rate of 10 kHz. Sensor-specific deviations such as non-linearity, hysteresis and temperature errors are compensated actively. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — internal sample rate 10 kHz — excellent thermal behavior — excellent long term stability — extremely short response times ≤ 0.5 ms Optional Features: — customer specific versions

DCT 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Due to the usage of high quality materials and components, DCT 531 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 531 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.25% FSO — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

Contrary to the industrial pressure transmitter with analog signal, DCT 532 has a digital i²C-interface. i²C has a master-slave topology, whereby you can use up to 127 devices at one master. Due to the usage of high quality materials and components, DCT 532 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 532 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar bis 0 ... 400 bar — accuracy: 0.25% FSO — output signal: digital i²C — bus frequency max. 400 kHz — configuration of data format — interrupt signal — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

The sensor technology of the DCT 533 is the same as those of the proven pressure transmitter DMP 331 / DMP 333, whereby the DCT 533 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 533 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0,35 % (opt. 0,25%) FSO — IO-Link according to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

The pressure transmitter DMK 351P has been designed for measuring small system pressure in the food industry and chemical industry. The DMK 351P is based on an own-developed capacitive ceramic sensor element. It features high overpressure resistance and high resistance against most of aggressive media. A variety of different process and electrical connections and an intrinsically safe version complete the range of possibilities. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0,35 % (opt. 0,25 %) FSO — hygienic version — high overpressure capability — several process connections (G1" cone, Clamp, dairy pipe, etc.) (G 1/2, dairy pipe, clamp, etc.) Optional Features: — IS-Version Ex ia = intrinsically for gases and dusts — diaphragm AI2O3 99.9 % — customer specific versions e.g. special pressure ranges

The pressure transmitter DMK 458 has been developed for marine and offshore applications. In addition to thread connections, different flush versions are available, which are especially suitable for pasty, viscous, and polluted media. Due to the capacitive ceramic sensor developed by BD\SENSORS, which is optionally available in Al2O3 99.9 %, the DMK 458 shows an outstanding accuracy as well as a high overload and temperature resistance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.25 % (opt. 0.1 %) FSO — shipping approvals: American Bureau of Shipping (ABS), Bureau Veritas (BV), China Classification Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Lloyd's Register (LR) — high overpressure resistance — excellent accuracy — accuracy: 0.25 % (opt. 0.1 %) FSO Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — diaphragm AI2O3 99.9 %

The pressure transmitter DMP 331P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process connections with different filling fluids and a cooling element. Several electrical connections complete the profile of DMP 331P. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy:0.35 % (opt. 0.25 %) FSO — hygenic version — diaphragm with low surface roughness — CIP / SIP cleaning up to 150 °C — vacuum resistant Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — cooling element for media temperatures up to 300 °C — diaphragm in Hastelloy® or Tantalum

The pressure transmitter DMP 457 has been especially designed for rough conditions occurring especially in shipbuilding and offshore applications. All gaseous and liquid media, which are compatible with stainless steel 1.4404 (316L) respectively can be used. Sensor element is a piezoresistive stainless steel sensor with high accuracy and excellent long-term stability. In order to meet the special requirements for shipbuilding and offshore applications extensive tests had to be passed to get the LR, Germanischer Lloyd (GL), Det Norske Veritas (DNV) and China Classification Society (CCS) approvals. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy:0.35 % (opt. 0.25 %) FSO — shipping approvals: LR, DNV, GL, ABS, BV, CCS — flush pressure port G 1/2" from 100 mbar — excellent thermal behavior Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — welded pressure port

The pressure transmitter DMK 457 with ceramic sensor has been designed for typical applications in shipbuilding and offshore constructions as alternative to our pressure transmitter DMP 457 with piezoresistive stainless steel sensor. In combination with the copper-nickel-alloy the DMK 457 is suitable for seawater, e.g. level measurement in ballast tanks, etc. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — shipping approvals GL (Germanischer Lloyd), DNV (Det Norske Veritas), CCS (China Classification Society), ABS-certificate (American Bureau of Shipping), LR-certificate (Lloyd´s Register) — pressure port CuNiFe (sea water resistant) — oxygen application Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts