BIT BIERTHER GMBH

Cross-linked polyolefin heat-shrinkable tubing BPGP 125 is a modified thin wall heat-shrinkable tubing made of polyolefin. BPGP 125 was designed for application to Gasflex piping. Shrink ratio: 2:1 Material: Polyolefin Use temperature: -55°C to +125°C Shrink temperature: min. 120°C Specifications: UL 224, 125°C, VW-1 (E196690) available dimensions ID in mm: from 24,5 to 76,2mm Standard colour: yellow Flammability: flame retardant, hardly inflammable Type BPGP 125 Diameter on delivery min. mm Diameter after shrink max. mm Wall thickness after shrink nom. mm Packaging unit roll in meter 24,5 24,5 9,5 0,70 100 27,0 27,0 12,7 0,70 100 31,0 31,0 12,7 0,70 100 40,0 40,0 19,0 0,70 100 51,0 51,0 25,4 0,75 50 65,0 65,0 32,5 0,75 25 76,2 76,2 38,1 0,75 25

Heat-shrinkable tube made from polytetrafluorethylene PTFE 400 is a semi-rigid heat-shrinkable tube made from PTFE, polytetrafluorethylene. It is available in a variety of different wall thicknesses. Many special properties, including high chemical, mechanical and thermal resistance, as well as low adhesion Shrink ratio: 4:1 Material: PTFE, polytetrafluorethylene Use temperature: -67°C bis +260°C Shrink temperature: min. +327°C available dimensions ID in mm: from 1,98 to 101,60 Standard colour: natural-colour, milky white Flammability: incombustible Type PTFE 400 Diameter on delivery min. mm Diameter after shrink max. mm Wall thickness after shrink nom. mm Packaging unit roll in meter Packaging unit meter 5/64 1,98 0,64 0,22 by request 1,22 1/8 3,18 0,94 0,25 by request 1,22 3/16 4,75 1,27 0,30 by request 1,22 1/4 6,35 1,60 0,30 by request 1,22 5/16 7,92 2,00 0,30 by request 1,22 3/8 9,52 2,44 0,30 by request 1,22 1/2 12,70 3,66 0,38 by request 1,22 5/8 15,87 4,52 0,38...

elastomer-based heat-shrinkable tubing BER 100 is a flexible, medium-walled, elastomer-based heat-shrinkable tubing. Its exceptional chemical and mechanical resistance makes the BER 100 a particularly appropriate solution where high levels of fuel and abrasion resistance are required. Shrink ratio: 2:1 Material: Elastomer Use temperature: -55°C bis +150°C Shrink temperature: min. 120°C; complete shrinking min. +175°C available dimensions ID in mm: from 3,20 to 76,2 Standard colour: black Flammability: hardly inflammable, self-extinguishing Type BER 100 Diameter on delivery min. mm Diameter after shrink max. mm Wall thickness after shrink nom. mm Packaging unit roll in meter 1/8 3,2 1,6 0,76 50 3/16 4,8 2,4 0,84 50 1/4 6,4 3,2 0,89 50 3/8 9,5 4,8 1,02 50 1/2 12,7 6,4 1,22 30 3/4 19,1 9,5 1,45 30 1 25,4 12,7 1,78 30 1 1/2 38,1 19,1 2,41 15 2 50,8 25,4 2,79 15 3 76,2 38,1 3,18 15 070/E310/101/06.2015

thin wall hard pvc heat-shrinkable tubing Very thin-wall heat-shrinkable tubing, ideal for packing battery packs. HPS is supplied in a flat-rolled version. The order code is determined by the flat breadth, the required wall thickness and the colour. Shrink ratio: 2:1 Material: hard PVC Use temperature: -20°C to +85°C Shrink temperature: +80°C Specifications: UL 224 on request Standard colour: clear, white, black, red, yellow, blue, green, clear-colored Flat width available from 4,0 mm to 250 mm corresponds to an inner diameter prior to shrinking 2,5 mm to 159,2 mm gradations gradations of the flat width are feasible in 0,5 mm steps standard wall thicknesses, measured at delivery 0,07 mm, 0,10 mm, 0,15 mm 0,20 mm and 0,30 mm packaging units by agreement or according our stock conversion flat width = 1,57079 x diameter diameter = 0,6366 x flat width 070/E010/101/06.2015