Brake Fluid DOT 3 is a excellent performance hydraulic brake fluid. It is use in automotive disc, drum and anti skid brake systems and clutch systems. Typical properties vary depending on the supplier of the fluid. Typical properties for brake fluids include: Density at 20º C, boiling point, wet boiling point, flash point and viscosity at 40º and 100º C. Applications : Brake fluid dot 3 is developed for use in applications where disc, drum and anti-skid braking systems are used in vehicles requiring DOT 3 level performance. Use only in its concentrated form out of a previously unopened or well sealed container. Seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this can reduce service life significantly. Do not reuse drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills without rubbing. Brake fluid should be drained from the vehicle every two years or after 40,000 Kms.
Turkey
Brake Fluid Dot 5 represents a top-notch silicone-based brake fluid intended for use in all hydraulic brake and clutch systems equipped with drum or disc brakes, excluding those utilizing LHM fluids. In contrast to DOT 3 and DOT 4 brake fluids, DOT 5 stands out for being non-hygroscopic, offering superior thermal stability, and featuring higher dry and wet boiling points. This specially formulated brake fluid contains rust and chloride corrosion inhibitors, ensuring excellent protection. With a dry boiling point exceeding 260°C and a wet boiling point surpassing 180°C, it meets the highest performance standards. In full compliance with FMVSS 116 DOT 5 and SAE J 1705 standards. Goes above and beyond all standard DOT 5 specifications. Boasts an elevated boiling point, effectively eradicating brake fade for exceptional performance. Remains impervious to atmospheric water absorption, ensuring a prolonged service life without reducing the boiling point.
Request for a quoteTurkey
Fullmono XH Series, is a super high performance monograde engine oil which is formulated with quality base oils and special additives. It is suitable to use in intercooler, turbocharged or naturally aspirated diesel engines under extreme operating conditions.
Request for a quoteTurkey
All in one additive for dot 3, dot 4 and dot 5.1 hydraulic brake fluids composed of specialty corrosion inhibitors and antioxidants in glycol ethers-glycols mixture Dissolves clearly in glycol ethers, glycols and water. 2% (w/w) BESOL BFCI supplies 0,2% antioxidant for the brake fluid Complies with FMVSS No 116 corrosion weight change limits and prevents from copper dissolution during lifetime of the brake fluid High ERBP and WERBP values of BESOL BFCI complies with brake fluid boiling point standards.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.