Chamber expansion joints - DN50 / DN150 / DN200
Description
Certain specialised areas of various industries require at times applications which cannot be adequately realised by the use of standard components. Specially designed expansion joints are used in these cases. The following specific design types are offered in addition to the standard series: pressure balanced expansion joints for axial and lateral movement elbow-conected pressure balanced expansion joints chamber expansion joints expansion joints, pressure applied externally expansion joints with PTFE single used expansion joints expansion joints for food industrie chamber expansion joints DN50 / DN150 / DN200 DP inside 6 bar DP outside 4,5 bar DT 155° C ax. mov. +/-15 mm lat. mov. +/-10 mm
Documents
A selection of products that might interest you
FLEXOMAT GMBH
Germany
Angular expansion joints absorb movements perpendicular to the bracing lane. The reaction forces caused by the internal pressure are absorbed by the hinge frame. In pipelines of larger nominal size and high pressure only tensioned angular expansion joints in the form of hinge-systems are able to absorb the expansion. Thus, for pipelines expansion joints are only installed as hinge-systems (combination of either 2 or 3 expansion joints). Those are L-, U- or Z-shaped. This requires additionally a 90 ° redirection of the pipeline. Thereby, stress due to inner pressure will be absorbed by the hinge tensioning. In case those systems cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed.. Types of design for angular expansion joints: Single hinge angular expansion joint for movements in one plane gimbal hinge angular expansion joint for omnidirectional movement
FLEXOMAT GMBH
Germany
FLEXOMAT GMBH
Germany
Flexomat know-how is the customer specific manufacturing of stainless steel corrugated hoses in various formats and dimensions. Flexomat stainless steel corrugated hoses are universally applicable and suitable for various media such as e.g. steam, water, oil, gas or chemical media. Corrugated hoses are applied to absorb movement and vibration or to compensate assembly inaccuracy. type SE: corrugated metal hoses, single-wall, medium wall thickness, standard pitch, one braid Typ SZ: corrugated metal hoses, single-wall, medium wall thickness, standard pitch, double braid Typ SEF: corrugated metal hoses, single-wall, medium wall thickness, low pitch, one braid Diameter DN6 up to DN300 Materials 1.4404 / AISI 316L oder 1.4541 / AISI 321 for the hose and 1.4301 / AISI 304 for the braid delivery length as standard length from stock or customer-specific-length after sprcification all common connectors according customer-specification DIN EN ISO 10380 DIN 3384 (DIN DVGW)
FLEXOMAT GMBH
Germany
Our highly flexible vacuum hoses are produced from longitudinal seam-welded, thin-walled stainless steel tubes, which are hydraulically formed in special-purpose machines. Our vacuum hoses are specifically cleaned after metal forming, during processing protected from uncleanness and prior to dispatch shrink-wrapped. Furthermore, all vacuum hoses will be leak tested prior to dispatch, by means of helium leak testing with up to 10E-8 mbar*l/s.