Chemical Detection and Monitoring (GCMS/GC/IR)
CMS5000
Description
Clean water is essential for life. As more chemicals are introduced to the environment, adverse consequences to water quality and corresponding health impacts will increase as well. In order to provide the highest level of safety and security, a fast response to water quality issues is necessary. The CMS5000 is a GC-based system that autonomously samples VOCs in water, quantifies contaminant levels and automatically alerts users if thresholds are exceeded.
Product characteristics
- Power Requirements
- Universal 110-240 V (ac), 200 Watts maximum
- Size
- 16.9 x 32.7 x 10.2
- Temperature
- 5 to 45
- Relative Humidity
- 5 to 95%
- Weight
- 55.1
- GC Column
- DB-1, 0.32 mm ID, 30 m, 4.0 μm df or equivalent
- Heated Zones- Maximum Temperature- Valves
- 60
- Heated Zones- Maximum Temperature- Column
- 225
- Sample Inlet- Water
- Continuous Monitoring SituProbe (dynamic purge and trap)
- Variable Column Pressure Control
- Regulator pre-set to 90 psi
- Temperature Programmable Column Module
- 55 to 200
- Carrier Gas
- Argon 99.999% @ 414-689 kPa (60-100 psi)
- Valves
- Stainless Steel body / Telfon diaphragm
- Sample Inlet- Air
- Air Sampling tube or direct plumb (
- Heated Zones- Maximum Temperature- Detector Oven
- 110
- Concentrator
- Tri-Bed
- Dynamic Range
- 3 decades
- Detection Limit
- ppb to ppt for most analytes
- Repeatability
- RSD calculated
- Temperature
- 5 to 45
- Ionization Source
- Ni-63 2.4 mCi
- Sensitivity in Water
- 1; 0.5 ppb MTBE in water s/n >15:1
- FTP
- Configurable for automated data upload
- Storage
- 160 GB (minimum) hard drive
- Touch Screen
- 6.5 in. VGA color display with touch screen
- Wireless Connectivity
- 802.11 B/G
- Integration
- I/O Relay Contacts USB for local diagnostics TCP/IP based Modbus over TCP/IP
- System Status
- Status table for system operating changes
- Computer / Data
- Internal Intel ® Pentium ® processor
- Data Results
- Text file with compound retention times, quantitation, time/date for all targeted compounds includin
- Data Analysis
- Automatic peak detection and integration for known compounds
- Integrated Performance Standard
- Toluene Permeation Tube for check standard calibration
- Detectable Compounds
- Volatile organic compounds (e.g. halogenated, aliphatic, and aromatic hydrocarbons)
- Acceptance Protocol
- Initial setup with purge method
Similar products from INFICON GMBH
INFICON GMBH
Germany
The Only Person-Portable GC/MS That Identifies VOCs and SVOCs Quick, Easy, Accurate On-Site Performance HAPSITE ER is the only person-portable Gas Chromatograph/Mass Spectrometer (GC/MS) that requires minimal training to deliver qualitative and quantitative lab-quality results-in the field, in less than 10 minutes. In fact, all the operator has to do is push a button to begin identifying and quantifying volatile organic compounds (VOCs), toxic industrial chemicals (TICs), toxic industrial materials (TIMs), chemical warfare agents (CWAs), and select semi-volatile organic compounds (SVOCs). HAPSITE ER has the capability to identify analytes in the PPM (parts per million) - PPT (parts per trillion) range. The GC column provides sharp chromatography and excellent resolution. During the quantitation method, the front panel clearly displays what chemicals are present, their concentration, and access to information regarding the degree of danger - to help make quick decisions...
INFICON GMBH
Germany
IRwin® Methane Leak Detector is an innovative, portable natural gas detector for easy gas pipe survey and gas leak detection. It is developed in accordance with many national directives, such as the DVGW (Deutscher Verband des Gas- und Wasserfaches) directive. The IRwin SX-models are certified for use in Zone 0, classification Ex II 1G, Ex ia IIC T3 Ga. The integrated proprietary infrared sensor system (patents pending) has a fast reaction and short recovery time. The system prevents false leak alarms and ensures correct and fast leak evaluation. The specially developed Gas Chromatograph (GC) and IR-sensor combination allows fast distinction between marsh gas and natural gas from all known natural gas sources. The IRwin GC gives fast test results, even at low ethane concentrations, from 1000 ppm methane leaks. IRwin is able to measure methane according to the traditional operating modes required by DVGW G 465-4, such as "Inspection above-ground" and "Measuring bar holes". The...
INFICON GMBH
Germany
Simplify and Accelerate Gas Analysis Micro GC Fusion offers significant throughput gain through rapid temperature ramping and modular architecture. The transportable, lightweight chassis and web-based user interface enables simplified operation for both on-site and in-lab gas analysis. Need application assistance? Click here! Need a Safety Data Sheet (formerly MSDS)? Click here! SO 2 and H 2S gas monitoring Permanent gases and olefins in refinery gas Impurities in petrochemical products and specialty gases Solvent/VOC gas monitoring Catalyst research for alternative energy