Compatible Vacuum Gauges and Controllers
MAG50x
Description
The INFICON Gemini Inverted Magnetron Vacuum Gauge is the workhorse for all vacuum measurement applications (pending). Gemini combines two sensor systems into one small device to measure from atmosphere to 1x10 – 9 mbar. The patented ultra-low magnetic stray field design opens up a whole new range of applications. A unique interchangeable dual chamber sensor unit avoids cleaning cycles and reduces maintenance, making Gemini the most robust and economical vacuum gauge of its kind. Gemini Cold Cathode and combination comes with fully integrated digital electronics, providing ultimate flexibility for system integration. Cold cathode and Pirani combination option provides seamless transition, reliability, practicality and flexibility across wide ranging applications. MPG500 series represents the latest Technology to act as direct replacement for Cold Cathode or Penning Transmitters of the PTR 90 / PTR 225 (analog Versions) series. Part-No Typ Part-No Typ 3MB0-006-000P MPG500 SS,...
Product characteristics
- Measurement system
- Cold cathode ionization measurement system (according to the inverted magnetron principle)
- Measurement range (air, N2)
- 1×10 -9 … 1×10 -2
- 1×10-8 … 1×10-2 mbar
- 30
- Mounting orientation
- any
- Admissable pressure
- 10 (limited to inert gases
- Operation (ambient)
- +5 ... +55
- Bakeout at flange (1)
- <150
- Storage
- -40 ... +70
- 1×10-7 … 1×10-2 mbar
- <95 (non-condensing)
- 1×10-8 … 1×10-2 mbar
- <70 (non-condensing)
- At gauge (2)
- +14.5 ... +30
- Ripple
- <1
- Power consumption
- <2
- Fuse to be connected
- <1
- analog output
- 0 ... +10.5
- 3MAx-00x-0x0N
- +1.5 ... +8.5
- 3MAx-00x-0x0Q
- +0.667 ... +10
- 3MAx-00x-0x0N
- 1 (logarithmic)
- 3MAx-00x-0x0Q
- 1.33 (logaritmic)
- Error signal
- <+0.5
- Output impendance
- 2x10
- Load impendance
- >10 (short circuit-proof)
- p > 10-6 mbar
- <10
- p = 10-8 mbar
- ~1
- Gauge identification
- 100
- Cold cathode ignited
- +15 ... +30
- 3Mxx-00x-000x
- FCC68, 8-pin, female
- 3Mxx-00x-010x
- D-sub, 9-pin, male
- 3Mxx-00x-000x
- 8-pin, shielded
- 50 m cable
- < 50 (8x0.14 mm 2)
- 75 m cable
- < 75 (8x0.25 mm 2)
- 100 m cable
- < 100 (8x0.34 mm 2)
- 300 m cable
- < 300 (8x1.00 mm 2)
- Operating voltage
- <3.3
- High operating current
- <500
- Low operating current
- <100
- 3Mx0-00x-0x0x
- Ni alloy, AI 2O 3, glass, stainless steels
- 3Mx3-00x-0x0x
- Ni alloy, AI 2O 3, stainless steels
- Internal volume
- 22.8
- DN 25 ISO-KF
- <280
- DN 40 ISO-KF
- <320
- DN 40 CF-F & CF-R
- <570
- Degree of protection
- IP 40
- CE conformity
- EMC (EN 61000-6-2, EN 61000-6-3), EN 61010-1 & RoHS
- Maintenance
- none
Documents
Similar products from INFICON GMBH
INFICON GMBH
Germany
Sustainable solution for process measurement, control and data log Compatible to the wide range of INFICON active gauges, the new VGC50x series of active gauge controllers are able to monitor and data log the entire pressure range from 10⁻¹⁰ to 1500 mbar (10⁻¹⁰ to 1125 Torr) and the set point status. The new VGC50x Active Gauge Controller series is the advanced successor of the discontinued VGC40x series which was the 1:1 compatible product Leybold`s Center-Controller line Material-No Typ 230 002 Center ONE 235 002 Center ONE (USA) 230 004 Center TWO 235 004 Center TWO (USA) 230 003 Center THREE 235 003 Center THREE (USA) As the direct successor for these series the new and advanced VGC50x series is able to accept all INFICON Active Gauges Successor product for VGC40x Controller series 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 5×10 -4…1500 5×10 -4…1500 5×10 -4…1500 5×10 -10…1500 5×10 -10…1500 5×10 -10…1500 mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa,...
INFICON GMBH
Germany
The INFICON Bayard-Alpert Pirani Combination Gauge, BPG402-S, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG402-S with two yttrium oxide coated iridium filaments for affordable and repeatable process to base pressure measurements in one economical package. Sensing elements with on-board calibration data guarantees high reproducibility when exchanging sensors. This Bayard Hot Ion (Dual Filament) Pirani Combination Gauge BPG402-S series direct replacement for Hot Ion - Pirani Transmitters of the ITR 200 series: Material-No Typ Material-No Typ 353-570 BPG402-S DN 25 ISO-KF = 230 250 ITR 200 S DN25 KF 353-574 BPG402-SP ProfiBus, DN 25 ISO-KF = 230 252 ITR 200 SP DN25 KF, PB 353-571 BPG402-S DN 40 CF-R = 230 254 ITR 200 S DN40 CF-R 353-576 BPG402-SD DeviceNet, DN 25 ISO-KF = 230 253 ITR 200SD DN25 KF,...
INFICON GMBH
Germany
The INFICON Bayard-Alpert Pirani Combination Gauge, BPG400, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG400 for affordable and repeatable process to base pressure measurements in one economic package. This Bayard Hot Ion Pirani combination Gauge BPG400 series direct replacement for the ITR 90 series: Part-No Typ Part-No Typ 353-500 BPG400 DN 25 ISO-KF = 120 90 ITR 90 DN 25 ISO-KF 353-502 BPG400 DN 40 CF-R = 120 92 ITR 90 DN 40 CF-R 353-505 BPG400-SP ProfiBus, DN 25 KF = 230 030 ITR 90 DN 25 ISO-KF 353-506 BPG400-SP ProfiBus, DN 40 CF-R 230 031 ITR 90 DN 40 CF-R 353-501 BPG400 LCD, DN 25 ISO-KF = 120 91 ITR 90 DN 25 ISO-KF Displ. 353-503 BPG400 LCD, DN 40 CF-R = 120 94 ITR 90 DN 40 CF-R Displ. 354-490 BPG400 Spare-Sensor DN 25 ISO-KF = E 121 02 ITR 90 Spare-Sensor IE90 DN 25 KF 354-491 BPG400...
INFICON GMBH
Germany
The INFICON Inverted Magnetron Pirani Gauges, MPG400 and MPG401, measure from 5 x 10 -9 mbar toatmosphere (3.8 x 10 -9 Torr to atmosphere). Combining technologies into one single compact unit withone logarithmic analog out put signal significantly reduces the complexity of installation, setup an dintegration. This Cold Cathode inverted magnetron Gauge MAG400 series is direct replacement of the PTR 90 Transmitter series: Part-No Typ Part-No Typ 351-010 MPG400 DN25 ISO-KF = 230 070 PTR 90 DN25 KF 351-011 MPG400 DN40 ISO-KF = 230 071 PTR 90 DN40 KF 351-012 MPG400 DN40 CF-F = 230 072 PTR 90 DN40 CF 351-999 MPG400 Maintenance set = none 351-998 MPG400 Repair set = none 351-995 MPG400 Spare-ignition aid (10 pcs) = none 351-994 MPG400 Ignition tool set = none 351-023 MPG400 Magnetic shield = 230 073 V01 PTR 90 Magnetic shield Within our own INFICON channel we also offer the type MPG401, which is a metal sealed version of the MPG40x line. For further information please check out the...