ELAP AUTOMAZIONE INDUSTRIALE - Smart Engineering for Industrial Environment

Elap encoders MEM-Bus EtherNet/IP can be easily integrated in any EtherNet/IP net, as they comply with all EtherNet/IP interface requirements, according to directives IEC61784-1. The encoder features the encoder profile 22H according to CIP™ protocol specifications.The encoders are ODVA conformant certified, including CIP Sync certification.MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. MEM-Bus EtherNet/IP are UL certified for the Canadian and United States market.

Absolute encoders MEM-BUS EtherCAT comply with Profile CANopen over EtherCAT (CoE), Cia DS-406. They avail on EtherCAT conformance certification and are UL Listed for the canadian and US market. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. Reduced cabling and easy configuration – each slave is addressed automatically – simplify the installing operations. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments.

Elap absolute encoders series MEM-Bus comply with the Encoder Profile Specifications V4.1 version 3.162 related to Profidrives. They fulfil the requirements of the Application Classes 3 and 4,that is they provide all functions for scaling factor, preset, rotational direction, positioning and speed values, diagnostic. MEM-Bus encoders support the RT Real Time and IRT Isochronous Real Time transmission mode, thus ensuring fast, accurate and safe data transfer. Besides standard telegrams 81, 82, 83, 84 Elap encoders support the user telegram 860, featuring Profibus telegram, a peculiarity which simplifies the encoder handling, as well as the possible migration from Profinet devices. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged, with solid or hollow shaft.

The absolute encoders series MEM-Bus avail on an interface to connect to field bus systems according to the CANopen standard. The encoders comply with standards CIA DS301, DS406, DS 305, featuring the functions of Class 2. They are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). The encoder operating parameters are set directly by the user: revolutions no., steps per rev., rotation direction and preset no. The diagnostic function signals possible parameter, position or temperature errors as well as the battery alarm – the data memory is anyway ensured for a long period (30 years). The baud rate and node selection can be easily set by LSS protocol or by means of dip-switches. MEM40-Bus encoders avail on 3 signalling LEDs for supply state, line and error. The encoder comes with metal housing, round flange, solid or hollow shaft. The electrical connection is by M12 connector. The encoders are UL listed for Canada and USA markets.

The encoders series MEM can be supplied in single or in multiturn version, with high resolution values: up to 13 bits info/revolution (corresponding to 8192 info/rev.) x 15 bits rev. (corresponding to 32768 rev.), in binary or Gray code. The multiturn encoders provide the SSI serial output signal, while the singleturn type offer two output options: SSI or push pull parallel signal. Several mechanical versions are available to satisfy all application requirements: round flange, square flange, hollow shaft, with different options for the shaft diameter and connection position and type.

Compact sized encoders series REC fit to any application where short body dimensions are required – the case length only measures 38 mm. REC encoders are available with different mechanical versions: with round flange and servo copling (type REC520/REC540), square flange (REC620) or hollow shaft, with (REC450) or without elastic support(REC440). The case is out of strong aluminium and connections are ensured by the connector type M12, or optionally by cable. The encoder with M12 connector output is UL Listed for the canadian and US markets. The pulses per revolution number ranges from 2 to 12500.

The incremental encoders series REV ensure high performances in terms of reading accuracy and signal stability. The aluminium housing offers an excellent protection against environmental agents and makes them suitable for applications in harsh environments. They can be supplied with round clamping or sychro flange, or square flange.

The range of square-flanged incremental encoders includes the series RE620, with centering mask diameter 31.75 mm, compatible with the international standard SIZE25, and the series RE650, with centering mask diameter 50 mm. Both the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats and the shaft diameters. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for both series (type RE621 – RE651).

The range of incremental encoders with 58 mm round flange includes different mechanical types: the series RE520, with centering mask diameter 50 mm, compatible with the international standard SIZE23, RE540, with centering mask diameter 36 mm and RE510 with centering mask diameter 31.75. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats and the shaft diameters. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE521 etc.).

The range of incremental encoders fit to be coupled to motor shafts includes different mechanical types: the series RE400, with flange diameter 53.5 mm and RE470, with flange diameter 72 mm, provide a coupling joint, while the series RE410 and RE450 avail on a hollow shaft. Different measures are available for the joint hole and for the shaft diameter. All the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for all the series (type RE401/RE411/RE451/RE471)