ERC ADDITIV GMBH - We are Additive.

ERC AdBlue is used for the exhaust gas cleaning of passenger and commercial vehicles and added to the exhaust gas flow from a separate tank. The Effect With the combustion of diesel fuel, harmful nitrogen oxide (NOx) is created. It must be removed from the exhaust gas in order to protect the environment and comply with legal exhaust gas limits. The Result ERC AdBlue is a clear, non-toxic, synthetic urea solution stored in an additional tank near the diesel tank or in the boot of the passenger vehicle. It is not added to the diesel fuel. ERC AdBlue is used for the environmentally compatible exhaust gas post-treatment of diesel-powered vehicles by means of selective catalytic reduction (SCR system) and converts harmful NOx components of the exhaust gas into the harmless air components nitrogen and water. The benefits at a glance ERC AdBlue: Environmentally-friendly Removes harmful NOx from the exhaust gas Non-toxic and odourless ERC AdBlue is simply filled from the container...

ERC radiator seal reliably seals up leaks and hairline cracks and prevents expensive repairs as a result. The Effect Leaks and hairline cracks in car radiators lead to loss of water and reduce the performance of the cooling and heating system. ERC Radiator Sealant provides an effective way of sealing leaks and hairline cracks. THE ADVANTAGES IN BRIEF: - Effectively seals critical hairline cracks - Does not form deposits or sticky residues within the cooling and heating system - Reacts only when it comes into contact with the air - i.e. at the specific location of the leaks and hairline cracks The ERC radiator seal is designed for one-time use and for all radiators. It is compatible with all glycol-based engine coolants.

ERC Soot Guard assures a permanently stable flame and soot-free, economical and environmentally-friendly combustion of heating oil in oil heating systems. THE EFFECT Soot is normally not a problem for modern oil heaters, except for oil heaters, where it may bring about high consequential costs. As a rule of thumb, a 1-mm-thick layer of soot on the boiler wall inhibits the heat transfer to the hot water to the extent that the heating oil consumption increases by approx. 4% with a consistent heat requirement. The main cause of soot is a poor and incomplete combustion of heating oil due to low oxygen levels. ERC soot guard relieves this and is simply added to the heating oil. THE RESULT ERC soot guard's catalytic effect is released in the flame and re-establishes optimal soot-free conditions. Consumption and costs are reduced and the impact on the environment as well as on the wallet is reduced, too. ERC soot guard works in more than just the flame.

- Seals oil leaks, reduces oil consumption - Prevents damage to the environment THE EFFECT Engine seals become brittle and begin to leak in the course of time. THE ADVANTAGES AT A GLANCE - Restores the elasticity of all engine seals - Effectively seals oil leaks - Reduces the oil consumption of the engine - Protects the environment by preventing the contamination of garage floors and parking spaces

THE EFFECT Coke deposits on the injection jets lead to an increase fuel consumption. Corrosion particles (either in the diesel fuel or formed within the fuel system itself) can put the entire fuel system out of action. ERC System Cleaner for diesel engines cleans contaminated injection jets and helps to prevent residues and corrosion within the fuel system. THE ADVANTAGES AT A GLANCE - Cleans the injection pump and injection jets - Protects against deposits and corrosion - Ensures reduced fuel consumption as well as Environmental-friendly combustion - Restores full engine performance

THE EFFECT Deposits on the valves and on the surfaces of the injection jets reduce the fuel flow and lead to a drop-in injection performance. The result of these deposits are increased fuel consumption, a higher level of exhaust emissions, as well as uneven engine running. The fuel-air mixture cannot form properly. Engine performance suffers accordingly. The highly concentrated ERC Valve/Fuel System Cleaner removes deposits from valves, from the injection jets and other fuel system components. THE ADVANTAGES AT A GLANCE - Removes reliably deposits especially from inlet valves, injection jets as well as from other injection system components - Improves reliability and fuel consumption - Restores full engine performance and ensures environment-friendly combustion

ERC Throttle/Butterfly Valve Cleaning Spray breaks down stubborn impurities in the carburettor system and prevents major repairs. THE EFFECT Deposits and impurities in the intake and throttle valve area impair the function of the carburettor system and increase the risk of corrosion and expensive repairs. THE ADVANTAGES AT A GLANCE - Removes soiling in the intake and throttle valve area - Cleans grease, dirt, and oil residue, as well as rubber abrasion off of metal surfaces - Can be used on (carburettor) linkages, cable wire passages and metal bearings

ERC Trak with BL-U 100 was specially developed for use in diesel generators with extended downtimes. THE EFFECT Many diesel engines are only operated sporadically or at certain times of year, such as in harvesting machinery, diesel generators, snowploughs, or sport boats. Their downtimes often exceed the storage life of the diesel fuel. Deposits and filter blockages may occur by aging products. Furthermore, increased corrosion may occur. THE RESULT With the newly developed additive ERC Trak with BL-U 100, the storage life and thermal stability of diesel fuel are doubled. Detergents clean and protect injection nozzles and injectors, the fuel system, and the engine interior. Engine efficiency and performance reliability are improved. ERC Trak with BL-U 100 sustainably prevents carbonisation on the injection nozzles and offers an additional extensive performance package for more power, a longer engine service life, and smoother running.

- Reduced friction - Reduced fuel consumption - Reduced wear on parts THE EFFECT Friction leads to wear and increases fuel consumption. ERC Gear Oil Power Additive is highly effective at reducing friction and wear by laying flake-like MoS2 particles on the metal surface; the particles then smoothly slide over each other on their parallel surfaces, reducing wear on the metal parts. Additional polymers add to the low-friction dynamics. THE ADVANTAGES AT A GLANCE: - Special product with MoS2 low friction formula - Highly effective at reducing friction and wear - Decreases fuel consumption - Decreases frequency of repairs - Ensures easy gear change and noise reduction - Increases endurance of the gearbox oil base and enhances dry-running properties

- for older generations of gasoline engines - protects against corrosion and deposits - enhances lubrication THE EFFECT Older-generation vehicles are often laid up for long periods after the summer season has finished. Moisture from the air and water precipitated out of the fuel then actively promote corrosion in the fuel tank, fuel lines and the interior of the engine. Old fuels can cause deposits, impairing fuel flow and injection performance. Fouled nozzles, inlet ports and valves thus impair engine performance, raise pollutant emissions and increase consumption. The introduction of low-Sulphur fuels also lessens the lubricant action on the injection and fuel system. The consequence: Increased wear. ERC Oldtimer Performance Additive protects against corrosion, increases the fuels lubricant action and prevents the formation of new deposits. It thus ensures engine reliability, combined with optimized consumption, particularly in older vehicles.