Turkey
Multi-Category
Turkey
- Measuring average volumetric flow rate in flow directions - Totalizing volume of flows independently or calculating their algebraic sum with regard to flow direction - Determining the current value of flow velocity and flow direction - Outputting measurement results to the frequency/pulse or logical output - Logging of measurement data and configuration settings in the internal nonvolatile memory - Displaying measurement, configuration and history (logged) data on the built-in indicator (LCD) and outputting the data to the external devices via M-BUS interface or RS-485 interface - Configuring the flow meter according to on-site and process requirements - Monitoring and indicating alarm conditions (ER, error situations) and faults; recording error and fault types and intervals into the corresponding logs - Protecting logged data and configuration settings from unauthorized access, -R400 -MAP16 -EN ISO 4064, -OIML 49, -RO-2275-15356 (TYPE APPROVAL)
Request for a quoteTurkey
ULTRASONIC WATER METER DN 15 to DN 40 MID CERTIFIED EN 14154 OIML R49 RO-2275-15356 TYPE APPROVAL READING OPTIONS; -PREPAYMENT -MBUS -PULSE OUTPUT -RF
Request for a quoteTurkey
-Static Pressure Test Equipment -LOSS OF PRESSURE TEST EQUIPMENT -WATER METER ENDURANCE (ABRASION) TESTING EQUIPMENT -HEAT METER DURABILITY TEST EQUIPMENT -DOMESTIC WATER METER TEST AND CALIBRATION EQUIPMENT -WOLTMAN WATER METER TESTING EQUIPMENT -HEAT METER TEST AND CALIBRATION EQUIPMENT -MOBİLE TEST UNIT
Request for a quoteAs EUROMET, We work on smart meter systems (water, gas and energy); primarily used commercially, remote meter reading and control panel systems, design and production special to institutions, pilot project execution. And also Euromet give importance to Technological & Metrological consultation, R&D services, technological development and progress. Via this prestige, Euromet has made an excellent administrative organization for both design in product quality and producing also software development and marketing and service from the production installation to after sales service.
Multi-Category
OSTIM ATB IS MERKEZI C BLOK NO:84
06105 Yenimahalle/ankara - Turkey
France
The line laser is a measuring device for aligning drive pulleys laterally, horizontally and vertically using a laser beam, preventing heavy wear to the edges of the belt. Laser beam range approx. 5 to 10 m Laser class 2 (EN 6082511997) Wavelength 630–680 mm Power < 1 mW Power supply 2 x 1.5 V (LR44) Note Never look directly into the laser beam and do not point it at other people, animals or strongly reflective surfaces. The device and the target points contain highpowered magnets. Individuals with pacemakers should not use the device due to safety reasons. Keep a safe distance away from electronic devices and wristwatches in order to prevent interference. The device must not be used in potentially explosive areas.
Request for a quoteGermany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteGermany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.