Slovenia
Manufacturer/ Producer
Slovenia
INSULATING PLATES are based on high refractory fillings, fibers and binders. Regarding special customers’ request we develop and produce shape-, dimension- and functionadjusted INSULATING PLATES in insulation or exothermic – insulation quality.
Request for a quoteSlovenia
Purpose of use: Steel castings Nodular graphite cast irons Grey cast irons
Request for a quoteSlovenia
SEGMENTAL THERMO INSULATION CHAINS – FINISHES FOR FOUNDRY SUPPLIERS AND HEADS AT CLASSIC CASTINGS OF STEEL INGOTS. Used in Conventional casting
Request for a quoteSlovenia
AQUADUR M-15 is a water-based ceramic dressing in pasty form. Its characteristic is a high refractoriness. Approximate composition: about 60 % refractory filling (Al and Mg silicates, Fe oxide) about 6 % organic binder about 34 % water Purpose of use: Aluminium and aluminum alloys, Steel castings ,Nodular graphite cast irons, Grey cast irons, Other colored materials
Request for a quoteSlovenia
Exothermic – insulating cups IZOLEX NZ are made of refractory, high insulation and high exothermic materials. IZOLEX NZ is intended as a covering for a more economical supplying of steel castings, malleable iron, cast iron with ball shaped graphite and gray cast iron with lamellar graphite.
Request for a quoteSlovenia
POPEX is an adhesive for cold sticking of sand cores and moulds. It is a paste of bright brown color. Used in Aluminium and aluminum alloys, Steel castings, Nodular graphite cast irons, Grey cast irons, Other colored materials,
Request for a quoteSlovenia
LUNKERIT L 303G is an exothermic insulating covering powder for all kinds of steels, cast steels and gray cast irons. Used for continuous casting, conventional casting
Request for a quoteSlovenia
ALUTIL MOP 417 is an non-pigmented dressing of petroleum, based on mineral oils. It is applicable for die-castings zinc and aluminum alloys.
Request for a quoteSlovenia
EXO – COATING ZG 3V is an alcohol -based dressing. Its characteristic is a high refractoriness and a wide range of applications. Purpose of use: Aluminium and aluminum alloys, Steel castings, Nodular graphite cast irons, grey cast irons, other colored materials
Request for a quoteSlovenia
KARBOSIL is a product for addition of Si and C in the molten iron. It is used in the production of synthetic iron, which required lower values of sulfur and nitrogen.
Request for a quoteChina
Xian Huan-Tai was founded in 1995. We are an ISO 9001 certificated company. We have been providing various models of sow molds to aluminum smelters in America, Australia,Canada, Germany, India, Italy and South Africa for nearly 3 decades. We gradually expanding our product line from sow molds to other castings used in aluminum recycling system, including dross pans, cooling heads, skim tools and other iron and steel castings. Responding to the customer demand, since 2010, we started to design and build dross press and other devices needed for aluminum recycling system, providing solutions for customers to maximize their aluminum recovery rates.
Request for a quoteFrance
We manufacture rough or fully machined continuous casting moulds in pure copper
Request for a quoteTurkey
Istanbul Dokum is an organization, has flexible production methods enable to cast, iron, nodular iron, steel, stainless steel, duplex, super duplex and bronze in sand molding system in a single foundry. Our foundry, as different from the hundreds of foundries across Turkey and Europe, complex is equipped to supply castings to customers. In our induction furnaces, your orders are casted carefully with our qualified personnel. Casting cleaning is carried out by a separate team within our structure and some parts are subjected to heat treatment in accordance with special demands. We apply heat treatment in order to achieve better mechanical values depending on the end use areas. Sandblasting is done in our 2500x2500x3500(h)mm inner dimensioned sandblasting machine with a single piece capacity of 10 tons.
Request for a quoteGermany
ALWA MOULD SLV is a universal two-component fast casting PU resin for mould making. It is used for the production of milling devices, negatives, product holders, foundry moulds, mould plates, copy moulds, core boxes, pattern plates, casting moulds, prototype parts, supporting moulds and synthetic cast. It consists of a beige-brown low viscosity resin component A (polyol mixture) and a red-brown, low viscosity hardener (component B) based on isocyanate (Methylendi(phenylisocyanat)e = MDI). Two types are available with different pot life: *ALWA MOULD SLV 3 ~ 3 min. pot life *ALWA MOULD SLV 9 ~ 9 min. pot life
Request for a quoteCreate one request and get multiple quotes form verified suppliers.