Outside dimensions: 600l x 400b x 185h mm Inner size: 540l x 340b x 120h mm Wall thickness: 30 mm Material: Polystyrene 100 *60 pieces on a pallet Our EPS, commonly called polystyrene boxes, cooling boxes, Isomo, Tempex, Styropor and Depron are extremely suitable for sending your products chilled or frozen. Our EPS boxes also protect your products. The EPS boxes have a very good insulation value and are also reusable.
Lithuania
Polystyrene (PS) is an aromatic polymer, made from the aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic. Polystyrene is a thermoplastic substance, which is in solid (glassy) state at room temperature, but flows if heated above its glass transition temperature and becomes solid again when cooled. Pure solid polystyrene is a colorless, hard plastic with limited flexibility. It can be cast into molds with fine detail. Polystyrene (PS) can be transparent or can be made to take on various colors. The chemical makeup of polystyrene is a long chain hydrocarbon with every other carbon connected to a phenyl group.
Request for a quoteUnited Kingdom
Highly transparent, High impact resistance and Lightweight Polystyrene. Cut to size to suit your requirements. Available in Thickness' 1.0, 1.2, 1.5, 2.0 & 2.5mm.
Request for a quoteItaly
Adhesive and lightweight premixed smoothener with glass balls based on hydraulic binders with high constant quality levels. The gluing and shaving of the insulating panels of polystyrene, polystyrene (also embossed), polyurethane, cork, cement wood inside and outside; The shaving of concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if varnished, provided that in excellent condition, plasters which have lesions of Retraction, it will be made with lightened powder adhesive/wiper with glass beads, based on hydraulic binders type "Intocol PP LIGHT" Malvin S.R.L., applied by hand and kneading with the addition of water, with a consumption of 2/4.5 kg/sqm as glue and 2.5/3 kg/MQ as smoothing, with compression resistance to 28 days of category CS III.
Request for a quoteTurkey
It has similar application areas with PVC. It has chemical resistance to acids and bases. It features weldability. Weldability is more difficult than PVC but more resistant weld seams are obtained. It has higher temperature resistance than polyethylene and PVC. Cost is low and economical since its density is very low. It has a high impact resistance. It can be used on section plates. Mechanical strength values are better compared to Polyethylene.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.