FR-HX - HIGHLY VISCOUS MEDIA

Pneumatic drum mixer for highly viscous media. The FRP-HX is Geppert Ruhrtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the drums. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FRP-HX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers. Special solution for highly viscous liquids of up to 5,000 mPas. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (device group II, category 1-3).

The pneumatic FRP-LX mixer series has been designed for easiest operation. Aluminum being the material of the housings and the adapters, it has a weight of only 6 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile agitator FRP-LX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers.

The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.

Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.