Germany
Manufacturer/ Producer
Germany
High-quality device for measurement of CW-, single pulse and modulated radiation. Features: Optometer for all detector heads with calibration data plug. Measurement modes: CW, pulse energy, dose, peak-to-peak, effective luminous intensity (Blondel-Rey), data logger, battery, main power, RS232
Request for a quoteGermany
Four-channel USB optometer designed for mobile use. Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB interface. Battery operation or power supply USB.
Request for a quoteGermany
Detector head for the measurement of photopic illuminance in Lux [lx]. Features: f1 ≤ 3 %, f2 ≤ 1.5 %, 0.5 nA/lx, 20mm height, for the usage with Optometers and amplifiers, calibration certificate
Request for a quoteGermany
Detector for Blue-light hazard measurements. Features: Multi-cell detector, optional Adapter for effective radiance, for the use with X1-3 optometer, calibration certificate
Request for a quoteGermany
Detector for UV hazard measurements. Features: UV-A and UV-BC actinic irradiance, UV-A radiometric irradiance, adapter for 80° FOV, for the usage with X1-3 optometer, calibration certificate.
Request for a quoteGermany
Detector for UV hazard measurements of solaria and other tanning lamps in accordance to UVSV. Features: Multi-cell detector for ERYTHEMA effective irradiance and UV-C evidence, for the usage with X1-4 optometer, calibration certificate.
Request for a quoteGermany
Detector for fast, time-resolved (ns) radiant power measurement of pulsed laser diodes and LEDs. Features: Integrating sphere for integration of laser modes and beam profile. Pulse waveform with peak power and pulse energy (in joules) of pulses with pulse lengths in the low ns range. Optional 7 mm measuring aperture for eye safety.
Request for a quoteGermany
Radiometer for high intensity LED irradiation in UV or blue light curing processes. Features: X1-1 Radiometer with separate detector. Responsivity 365nm - 440 nm. Cosine viewing angle. Calibrated at six LED wavelength
Request for a quoteGermany
Optometer for the measurement of UV and Blue-light hazard of artificial radiation source. Features: for usage with XD-45-H type detectors, compatible to EU guidelines 2006/25/EC, mobile,battery operation, USB interface
Request for a quoteGermany
Broadband radiometer for radiation protection measurements of UV radiation devices. Features: Mobile ligh meter for UV radiation while working with artificial UV (UVSV). Erythema effective irradiance and detection of UV-C radiation in accordance with the UV protection Act for solaria. UVSV, DIN EN 60335-2-27 and DIN 5050-1:2010-01 conformity.
Request for a quoteManufacturer/ Producer
An der Kälberweide 12
82299 Türkenfeld - Germany
Germany
Laser Scanner Solution: This task is a typical application of the high-resolution QuellTech 2D/3D Q5-880 Blue Laser Scanners. Two of these units are placed at the left and at the right of the measuring objects, at a defined inclination angle. Blue laser light in this case is a prerequisite, as the cast parts are red-hot, hence emitting in the red spectral range. Additionally, the client was in need of a software solution for the project, so a 3D point cloud processing application was implemented, performing inline and evaluating width, height and angle results. QuellTech customer is able to inspect continuously the product quality, simultaneously avoiding scrap. He uses the same system for more than 10 different types of castings. Errors caused by manual inspection are considerably reduced, and safety for personnel is enhanced.
Request for a quoteGermany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.