GLÄSNER SANDSTRAHL MASCHINENBAU GMBH

This is the ideal piece of equipment for blasting small and even smaller surfaces of glass and metal for matting, fettling, cleaning, polishing and drilling. All mineral media such as corundum, glass beads, cullet, silicium, walnut and plastic granules in the grain size range of 0 - 300 μ can be used as blasting agents. There is a selection of hard metal nozzles with a diameter of 0.8 mm and 1.0 - 1.2 mm as well as 1.5 mm for various requirements.

3 sizes for marking of flat glass panes and Hollow glass bodies with logo's or lettering, max. 25,38 and 54 mm diameter! The device consists of in detail 1 tank made of sturdy steel plate, 6 liters. Contents, 3 feet, mounting bracket, lockable Fill cap for the blasting agent (corundum), and overpressure nozzle with filter element Needle felt (easy to replace). 1 special blasting gun with built-in injector nozzle, and venturi wide mouth – blasting nozzle and Compressed air connection nipples. 1 special distribution head for receiving the stencil, which are rapidly renewable, and the Recycling of the blasting agent in the container or in the filter element. 1 set = 4 pcs. Connecting hoses between blasting gun and containers or distribution head and the container.

The HL-Druckstrahl-Rücksaug-System for the mobile, dust-free sandblasting of hard / non-dismountable parts, such as steel carriers, running gear or similar large parts. The Mega Clean Master is often used in car body repair shops, shipyards, but also in road and rail traffic. The Mega-Clean-Master is the optimal solution for parts that are difficult to access or can be dismantled, which have strong corrosion or stubborn lacquer parts. Mobile, efficient, dust-free, and thanks to the built-in high-performance print-jet system, the perfect companion for difficult-to-clean parts.

The device is a rugged Industrial Equipment for industry and trade for marking large quantities. Our model "Professional" is working very effective, economical and requires only one low maintenance. It can be very fine lines to to 1.10 mm accuracy blasted. Furthermore, this machine works quietly and dust free. Technical specifications length 800 mm width 700 mm height about 850 mm (optional changeable) mass 120 kg Compressed air required 2-8 bar

The housing is made of folded stable sheet steel and welded. In the cabins 2 workports with built-in rubber sleeves (easily exchangeable) are incorporated. The cabin is equipped with a blast hose, nozzle holder and nozzle 1 made of hard metal. For the different requirements are made of hard metal nozzle with a diameter of 0.8 mm, 1.0 mm or 1.2 mm for selection. All blasting medium-pressure vessel (1 - 3 Tank System) have a volume of 2 kg and provided with a closure cap. In all systems, a pressure reducing valve and a pressure gauge for setting a constant jet pressure, and compressed air supply are fitted with plug-in nipple. All systems are equipped with a pneumatic foot switch for turning on and displaying the blasting process.

Our model "Super-Glasmatic" is particularly characterized by a compact, Compact design, simple operation, low material consumption, optimum use of space, highly effective dedusting, rational workmanship, environmentally friendly operation without dust pollution and adjustable material consumption. Housing with 2 mm steel plate, with complete blasting agent recovery, with drain cup for quickest change of blasting agent, with interior lighting of the blasting chamber, with brush slots at the front, approx. 600 mm long for optimum processing of the glass objects, with 3 brush slots on the side and at the top for problem-free penetration of the parts to be irradiated, With sliding blades at the sides for dust-tight closing of the booth during the blasting process, with standard beam head and spray gun with hand lever, with all necessary compressed air and blasting hoses, with large plexiglass door (750 x 400 mm) for optimum visibility Filter system (residual emission <5 mg / m³).

The injector-glass-blasting cabin is operated by hand with a gun. A blast-collecting collector ensures a smooth blasting circuit within the system. With the help of roller rails, as well as through-slots (on the side and in the roof surface with special brushes against the penetration of dust), surface treatment of glass panes is easy. On the front side there is an easy-open loading door for radiating hollow glass bodies. A work grate and two shock-proof long-field lamps (for glare-free illumination of the blasting chamber) guarantee a smooth workflow. The foot switch as well as the drain cup on the blasting agent funnel, an attached control box with pressure reducing valve and pressure gauge, motor protection switch, on / off button, solenoid valve, control lights, switches for interior lighting, main switch, emergency stop switch and support control ensure uncomplicated operation.

The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.

As an experienced manufacturer of sandblasting halls and facilities of blasting houses, we offer with our team, problem solutions tailored to your needs and individual case worked out. Price on request

The AQUA BLAST wet blasting cabinet is a combination system for degreasing and simultaneous gentle beams of various workpieces. The water - jet mixture is housed in the cabin swamp. This abrasive mixture is sucked in via a novel centrifugal pump of wear-resistant polyurethane. At the jet of compressed air is additionally adjustable added so as to achieve an optimum surface finish. After loading of the workpiece, the blasting medium mixture flows back into the cabin sump and is thus an abrasive circuit ensured. Battered fine abrasive is suspended from the cab sump and fed to a band filter on the cabin back.