Guide Rods

These bearing blocks permits to realize linear tables with 2 guide rods. Guided by 4 ball bushings and protected by 4 wiper seals. Quadruple bearings or bearing blocks These bearing blocks (or quadruple bearings blocks) permits to realize linear tables with 2 guide rods. Guided on 4 ball bushings and protected by 4 wiper seals. The housing is in anodized aluminium. In option, for dusty environment additionnals wipers in nitrile (/RNI) or polyurethane (/RPU). With 2 guide rods in hardened steel, you can easily make a precision linear table that will withstand significant torques and loads (according to the length of the rods). These blocks are interchangeable with the bodies of Type 306 linear tables, Type 309 trapezoidal screw tables, Type 308 ball screw tables and Type 307 pneumatic cylinder tables. They can therefore be the basis for a special execution of these products.

Floating rod coupling for pneumatic, electric or hydraulic cylinders Zinc steel or stainless steel 304L With axial play or adjustable play Floating coupling for cylinder rod These rod couplings make it possible to connect the rod of a pneumatic cylinder (or electric) to any part to be set in motion while avoiding any stress on the rod. They are available in 2 versions . with axial play (<0.20 mm) usual pneumatic applications and for pushing applications . with adjustable play for positioning applications => The version with axial play allows a radial compensation of the axis of the cylinder rod, it’s for usual pneumatic applications => The version with adjustable play allows the axial play to beRod coupling with adjustable axial play – reduced by screwing the cylinder rod against the internal pin and then unscrewing it slightly (then lock with the cylinder rod nut against the coupling) – removed by screwing the cylinder rod against the internal part (with tightening)

These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks

Pneumatic cylinder double acting Guided by 2 rods on ball bushings or bronze bearings Elastic damping at end of stroke Magnetic piston and Tgroove for sensor Robust and precise compact cylinder with guide Long and precise guidance because even for very short strokes, guidance is ensured by 4 bronze bearings or 4 ball bushings as the shortest body is the 50 mm stroke for lower strokes, a stroke limiting ring is placed in the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultrashort guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to screwed cylinder’s covers (no circlips) an hardanodized body at 35 μ a thick front plate allowing a long centering of the rods for a better resistance to torsion Guided cylinder for universal detector The 5 / 6.5 mm Tslots allow the use of the majority of brands of magnetic detectors on the market. Stroke adjustment on compact guided cylinder