For electric cylinders ISO 15552 size 32 to 100 Selfcentering rod coupling without axial play adapted to positioning Principle of rod coupling with reduced axial play Rod coupling with adjustable axial playThe difference with the ISO 15552 pneumatic cylinder guide units is at the level of the cylinder rod coupling on these guides for electric cylinders, the selfaligning rod coupling has no axial play (or a reduced axial play) depending on the assembly carried out, these units without axial play are therefore suitable for positioning applications. For applications without positioning accuracy or with high radial loads in static, it’s possible to use the guide units for pneumatic cylinders with a guide on plain bearings, since the rod coupling has an axial play (<0,2 mm). Guides for nonISO actuators For electric actuators which are not ISO, we know how to adapt our guide units to most of the rod actuators on the market see Hguide for actuators.
France
Guides, delivered without motor, allows to realize systems with 1, 2 or 3 axes For LinMot® motors P0123, P0137, P0148 Stainless steel version for *SSC motors Presentation of the range of guides for LinMot® motors These guides are intended exclusively for cylindrical linear motors of the LinMot® brand and are broken down into 5 families LB modules for pick and place manipulators LE modules Gantry LR LH guide units comparable to guide units for pneumatic cylinders Guides in stainless steel LX and LW for motors * SSC Special features of the LE and LB modules On LE modules, for vertical applications, it’s possible to have a mechanicalpneumatic brake or a LinMot MagSpring. The LB23 module is equipped with pneumatic balancing (antifall in the event of a power outage but also for high speed by eliminating the impact of gravity).
Request for a quoteFrance
These linear guide bearings are available in cylindrical short housings or prismatic long housings. Guided on ball bushings, bronze or polymer bearings. The housing is in anodized aluminium. To build your own linear guide These linear guide bearings make it possible to create a guide unit adapted to your needs and integrated into your machine You choose the diameter of the guide rods according to load capacity and rigidity, the type of guidance (bronze, polymer, ball bushings), the guide length (long prismatic or short cylindrical bearings) and the rods spacing according to the application. You can integrate any cylinder (type, standard, brand …) by using a cylinder rod coupling. You limit the number of parts by directly using a support of your frame and your end plate. A range of stainless steel guide bearings is also available Guide Type 34X You can also use bearing blocks
Request for a quoteFrance
H guide unit for pneumatic cylinders ISO Ø12 to Ø100 Long guide on ball bushings or bronze bearings Protected by wipers seals H guide unit according ISO standard This Classic series of linear guide unit is the most common on the market. It ensure the guiding and antirotation of the payload, the floating coupling protects the rod of the cylinder from any mechanical stress. Adapted to the ISO6432 (Ø12 to 25) and ISO15552 (Ø32 to 100) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Guide unit on plain bearing or ball bearing The plain bearings version is recommended for static radial loads, short strokes, dusty environments, it’s the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentering loads. For critical applications, we propose Strengthened and Heavy series and for simple antirotations, you can opt for Useries, Classic or Light.
Request for a quoteFrance
Our H guides can be adapted to many electric actuators of the market (with threaded rod or tapped rod). Also available in anticorroding version (AluStainless Steel)
Request for a quote