A roller with a solid shaft as standard, hollow shaft as option Bearing seats formed as an integral part of the shell, the opposing bearings are therefore accurately aligned The formed bearing holders improve bearing performance leading to lower failure rates Dimensions: Roller diameters 152 – 219 mm (6” to 8-5/8”) Shaft diameters up to 62 mm (2-1/2”) Bearings 6306, 6308, 6310, 6312
Netherlands
These bearings are doublerow, full complement with a low cross sectional height designed for use in sheaves. There are two types, sealed and shield type. They can withstand heavy radial loads and shock loads at comparatively lowspeed rotations, and can also withstand axial loads. It is easy to fix them axially to sheaves using the stop rings of the outer ring. The width of the inner ring is designed to be larger than that of the outer ring, so they require no spacer between sheaves. The structure is stable because the doublerow of rollers can withstand the moment loads caused by rope transition. The surfaces of these bearings are also treated to provide high corrosion resistance.
Request for a quoteGermany
Franke bearing asseblies type LVG are bearing assemblies made of aluminum, designed as double row angular contact roller bearings with integrated bearing elements. LVG bearing assemblies are suitable for the highest load ratings. They convince by high rigidity, low rotational resistance and low weight. Designed as roller bearings, they can support high loads from all directions and are insensitive to shocks and vibrations. Franke LVG are sealed on both sides and are set with preload. By using aluminum, Franke beaing assemblies type LVG are 60% lighter than comparable steel bearings.
Request for a quoteItaly
Steel rollers with the jacket consisting of tube and bearing mounting head rigidly coupled by welding.Monobloc steel rollers are used in conveyors with medium, heavy or very heavy loads. Depending on their application, the rollers have specific shapes for connection to the structure. This need is particularly noticeable in the production of gravity and motor-driven conveyors.For the correct installation of steel idlers, refer to the “Fixing rollers to structures” section on page 11.For the correct installation of motor-driven rollers, refer to the “Fixing rollers to structures” section on page 68. The diagrams and Table 60 show the shapes of the ends of the axles envisaged in TECNORULLI production’s “Monobloc steel rollers” programme.On request, other forms of connections and rollers with hubs can be considered.
Request for a quoteFrance
Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note On telescopic slides with partial extension both sides, the travel is less than the installed length. Latches in open position on both sides. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 50,000 cycles. The load capacity is ca. 75% lower by horizontal mounting. The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide. Advantages Pulls out in both directions Latches in open position on both sides Light running
Request for a quoteCreate one request and get multiple quotes form verified suppliers.