Germany
Manufacturer/ Producer
Germany
Device details: ▪ Device is according to the standard IEC EN 60811-2-1 (Heat elongation test, tensile test) ▪ Handy, electric device for material tests in laboratories ▪ Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”) ▪ Especially for hard materials
Request for a quoteGermany
Device is according to the standard IEC EN 60811-2-1 (Heat elongation test): ▪ The samples are taken from the inner side of the sheath and isolator ▪ All grooves and/ or conductive layers are removed ▪ Developed to slice samples according to IEC 60811 with a thickness between 0.8 and 2.0 mm (0.04” – 0.08”)
Request for a quoteGermany
Device details: ■ Simplifies the cable sample arrangement for measuring under a microspcope or the VCPLab ■ Arranging with friction wheels, cogwheels and a durable rubber tooth belt ■ Easy and quick operation ■ Robust device made of aluminium, stainless steel and brass - no corrosion ■ Quick sample fixing of a cable sample due to a lever mechanism ■ Perfect for e.g. measuring the heat pressure test indentation according to 60811-508
Request for a quoteGermany
Device details: ▪ vacuum pump to pick up small cable samples ▪ suitable for cable measuring device VCPLab and cable o-ring cutter ORC Micro
Request for a quoteGermany
The LUMIMAX® Mounting Systems allow the direct mounting of the LED light to the camera series Cognex InSight 5xxx, SIMATIC MV440 and Baumer Verisens XC. The mounting variations can be individually adapted and expanded flexibly, so that exact matching of the lighting angle and working distance is guaranteed. Lighting, optics and camera form a single, compact unit. A special feature is the innovative mounting solution, wich allows four Bar lights in the LSB series to be incorporated in the square. Protection class: IP64
Request for a quoteGermany
The LUMIMAX® Mounting Systems allow the direct mounting of the LED light to the Cognex camera series Insight 5000, 7000 GEN2, 9000 and also on the Cognex barcode reader series DataMan 470. The mounting variations can be individually adapted and expanded flexibly, so that exact matching of the lighting angle and working distance is guaranteed. Lighting, optics and camera form a single, compact unit. Protection class: IP64
Request for a quoteGermany
The mechanical design of the LUMIMAX® Area Lights with LightGuide technology was significantly reduced by repositioning the cooling fins as well as the optimization of the light guides and the controllers. The dimensions (l x w x h) and the weight of the new versions are about 25% lower compared to the predecessor models - with the same light field dimensions. Thanks to newly developed flexible cable outlets on the rear of the lights, the connection cables can be flexibly positioned. Thus, the optimized, more compact casing design with protection class IP64 enables flexible use in demanding industrial environments.
Request for a quoteGermany
Device details: ■ Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5 ■ Case set offers all required weights for the test ■ Easy operation ■ Very robust and solid construction ■ Steel impact piece included ■ Up to 3 Samples can be tested simultaneously ■ Device suitable for positioning in a cold chamber Options: ■ Cold Impact Test „one sample“ ■ Cold Impact Test „up to 3 samples“ ■ Cold Impact Test „1 x photovoltaics“ (VDE PV01:2008-02) ■ Laboratory freezer - technical specifications on request
Request for a quoteGermany
Save up to ⅔ measuring uncertainty with well prepared samples ■ Easy and fast operation ■ Robust, compact device out of stainless steel - no corrosion ■ 4 different adapters to stabilise the samples (on request more adapters of different sizes available - Product No.: 402.0007.13) Area of application: ■ Sample preparation according to IEC 60811 ■ Sample cutting device for cutting very small samples up to 3.5 mm (0.14“) outer diameterdepending on material and wall thickness ■ Optimal cable preparation device for measurements with offline cable measurement devices ■ Use of the Cable O-Ring Cutter is essential for your Quality Management ■ Compact and light device to easily use in laboratories and production halls
Request for a quoteGermany
Device details: Save up to ⅔ measuring uncertainty with well prepared samples ■ Quick and efficient cut ■ Thin, evenly and parallel cut samples with a smooth surface ■ Is a ideal complement to ORC65 and ORC150 ■ First ORC device which cuts sectors with ease ■ LED light to illuminate the cutting process Area of application: ■ Sample preparation according to IEC 60811 ■ Quick and efficient cut of hard materials (PE, XLPE) with an outer diameter up to max. 80 mm (3.15“) ■ Optimal cable preparation device for measurements with offline cable measurement devices ■ Use of the Cable O-Ring Cutter is essential for your Quality Management ■ Compact and light device to easily use in laboratories and production halls
Request for a quoteManufacturer/ Producer
Neuer Friedberg 5
98527 Suhl - Germany
Germany
Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).
Request for a quoteGermany
The QS View software package is intended for dimensional control in 2D or 3D QS-View 2D / 3D software for all measuring tasks 3D representation of an irregular body for determination of volume and weight. With the 2D / 3D software a wide variety of parameters can be processed and displayed, e.g. length, width, angle height, gap, presence, volume (resp. weight), seam geometry (height, width), gap dimensions. Due to the modular structure of the software, customized specialties can be added any time. Each module delivers the results to an individual output module. The universal SPC interface allows simple connection to S7 controllers via Ethernet. 2D / 3D software developer kits are available for integrators with corresponding knowhow.
Request for a quoteGermany
Laser sensor Q4 – with a small form factor – Q4 for standard 2D / 3D measuring applications: Low sensitivity against influences of secondary light Measuring ranges from 5 mm to 1000 mm Laser wave lengths starting from UV via blue, red and green through to IR Average measuring speed up to 350 Hz frame The Q4 laser sensor has been designed to meet the requirements of standard measuring applications. Thanks to its increased flexibility, it can be used for several tasks also in complex projects. The dimensions of the ultra-compact version amount to only 86x40x25, at a weight of 140 g. Protective panes and cooling modules are available as an option. The Q4 laser sensor model enables users to obtain stable measuring results also on difficult surfaces, whether mirroring or transparent. The QS-View Standard Software comprises a comprehensive selection of application modules, to be invoked at once without previous programming steps. Customized adaptations are possible any time.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.