An indirect dry cooling system is characterized by the use of a condenser and air-cooled heat exchangers.The cooling system consists of the following main components :condenser (surface or spray type),cooling water circulating pumps and recovery turbines, if applicable,heat exchanger deltas including louvers,natural draft cooling tower,piping and valves,water storage tanks and transfer pumps,electrical equipment,instrumentation and control,accessories such as cleaning system, nitrogen blanketing system,The warm water from the condenser is delivered to the natural draft cooling tower by the cooling water circulating pumps and an underground piping network. After the cooling in the heat exchangers, the cold water returns to the condenser.
Italy
Drycoolers are simple and reliable equipment. Their principle of operation is based on a sensible heat exchange between air and water where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil and cools when ambient air (colder cooler) laps the surface of the latter. Exchange coils, with a "V" arrangement within the cooler, consisting of copper tubes and aluminum fins. The angle between the coils, the diameter of the tubes, and the thickness and length of the fins, are sized to ensure the best heat exchange performance, for a given fluid and air flow pressure drops.
Request for a quoteItaly
The PAD-V adiabatic system is the optimal solution for increasing the efficiency of air systems, with capacities from 75 to 1,100 kW. Dry operation during cold periods: ambient air is drawn in and conveyed to the heat exchange coils (where the fluid to be cooled passes through): no water in the circuit, as during standard dry cooler operations. Energy use is also optimized by electronically modulated fan speeds based on temperatures. Adiabatic operation during hotter periods: outside air passes through the humidifier pack to be pre-cooled, before being conveyed to the finned coils and performing its cooling function: efficiency is increased. This also makes it possible to work at lower ambient temperatures.
Request for a quoteGermany
Our gwk engineers are passionate about developing technical solutions and this is what we as manufacturers want to prove in the area of cooling towers with our gvk/ghkv series. We see it as our task to understand the entire process of our customers. Therefore we have focused on quality and longevity for the products gvk/ghkv. The cooling towers are part of a central cooling tower system, supplied turn-key and regulated with a freely programmable microprocessor control system or programmable logic control. They are used for dissipation of excess heat from production systems with a higher temperature level and they operate on the principle of evaporation. This is an important consideration for environmentally conscious industries.
Request for a quotePoland
Acefast E2 is a modern induction charger designed for wireless energy renewal . Made of high-quality materials, a handy gadget , equipped with fast cooling technology and an intelligent management system protecting the equipment against overvoltage, overcharging or overheating. The cooling system is additionally supported by a series of ventilation holes located on the bottom of the accessory . The charger has an LED backlight that turns on during operation
Request for a quoteCreate one request and get multiple quotes form verified suppliers.