nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from the feeding belt parallel to the working time. The heating process takes place in two independent work stations. The generator has a switched output which means that only one generator is required for the two heating stations. The system is controlled using a SIEMENS PLC controller. Example Heating System 2: the aluminium housing (diameter 140 mm) of a synchronous motor is heated to approx. 280°C in approx. 3 minutes to fit the stator. The component is loaded into and unloaded from the heating station semiautomatically. The system is controlled using a PLC.
Germany
The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.
Request for a quoteGermany
CSN® explosionproof flow heaters are used for heating up flowing gases and liquids in hazardous areas. The devices consist of explosionproof flanged immersion heaters, which are installed in corresponding pipe or pressure vessel. Our products realize individual solutions for complicated technical process. Different heating systems for heating up liquids, nitrogen or other gases activate exact determinded processes in chemical factories. In close discussion with our customers problems will be defined and changed in technical optimale solutions. Our QualityManagementSystem ensures the high quality level of our customers. Further information about our CSN® Exflow heater
Request for a quoteGermany
With our CNC-wire-laying technology is it very easy to integrate functions like heaters for Anti-Icing/De-Icing or surface sensors for detections of structural problems in carbon or glass fiber parts. We can manufacture dimensions up to 2500x8000mm.
Request for a quoteGermany
Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable, cold lead and temperature sensors. Concrete floor heatings from Klöpper Therm are the optimum protection against dangers from black ice in cold stores. Concrete brings heat from outside into the cooling chamber. Thereby the temperature of the concrete along the heat flow falls to the temperature of the cooling chamber. The moisture stored in the warmer air condenses on the cold concrete surface through which black ice can form. Dangers through the exchange of warmer and colder air arise particularly in the area of locks. When, through repeated opening of the doors, condensation from the walls and ceilings falls on the floor and black ice forms, it can lead to accidents. In consequence of the effects of permanent cold, doors can freeze solid at the seals and be severely damaged.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.