Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.
Turkey
Conveyors that we use for painting plants and various transfer lines are the most important parts of the automatic systems. Commonly used Webb, Kardan and Power & Free type conveyors are projected and put into used by us. Semi-automatic conveyor lines are also produced for lower production capacities.
Request for a quoteTurkey
Powder and Wet paint equipment must be determined and selected carefully according to the properties of the parts to be painted. In our systems, we use the highest quality, most efficient and most reliable, manual and automatic powder and wet paint guns, single and multi-axis robots.
Request for a quoteTurkey
Penetrant non-destructive testing method is a system that is used for the detection of cracks in the surfaces of parts. After the material which is going to be subjected to penetrant test is pre-cleaned, it is subjected to penetrant application as dipping or spray. After this process, the material is rinsed and dried. Powder “developer” is applied electrostatically on the dried material. Finally, possible cracks and faults on the material are detected by checking under the UV lamp.
Request for a quoteTurkey
It is the furnaces where the hardening process of various aluminum profiles is happened, in other words, the aging process. Aluminum profiles are loaded into the furnace with the help of loading cars. The profiles which are kept in the oven at about 185 °C for 6-8 hours will be harden with the aging process. The whole operation is programmed with the PLC control unit. Thanks to its safe guillotine doors, they contribute to the air circulation in the interior and provide security with the locking mechanisms.
Request for a quote