Keiper’s series of UNITRANS conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.
Germany
Overview to the technical datas of KEIPER conveyor belt product range UNITRANS
Request for a quoteGermany
The Keiper UNITRANS conveyor belt series can be fitted with different sidewalls. Sidewalls are used as margin stops, usually together with cleats and entraining elements, in ascending and descending conveyor systems. The sidewalls prevent the products from falling off the sides of the belt. Inclined conveying: steep or angled conveying up to a slope of 80° in connection with cleats. Horizontal conveying: transporting bulk material and different-sized products. Conveyor belt sidewalls made of PVC, PU or special materials such as PU foam, polyolefin or polyester. With or without fabric interlayers. With or without foot. In the colors blue, white, green petrol, black or transparent. Depending on the design, in oil- and grease-resistant quality as well as FDA/EU approval. High abrasion and cutting resistance.
Request for a quoteGermany
The Keiper UNITRANS conveyor belt series can be fitted with numerous different entraining elements and tracking guides. Entraining elements are used for ascending or descending conveyor systems, linear movements and when lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Tracking guides are used to ensure directionally correct and stable guiding of the belt on the conveying system and to prevent the conveyor belt from running off. Conveyor belt entraining element or tracking guides made of PVC and PU in blue, white, green, petrol or transparent. V-shape, rectangular or block tracking guides. Smooth or notched design. Depending on the design, oil and grease resistant, with FDA/EU approval.
Request for a quoteGermany
The Keiper UNITRANS conveyor belt series can be fitted with numerous different cleats and entraining elements. Cleats and entraining elements are used for ascending or descending conveyor systems, linear movements and whenever lateral forces occur. With these elements it is easier to carry along, transport and place the products to be conveyed. Conveyor belt cleats made of PVC and PU – with or without fabric interlayers – in blue, white, green, petrol or transparent. Depending on the design, they are resistant to oil and grease, have FDA/EU approval. PVC/PU cleats made of belt material can be produced in a straight design or with an inclination of approximately 60° or 80° respectively. We also have a wide range of special cleats such as, for example: PVC 60° Shore A, closed-loop cleats, profiled cleats made of belt material, fabric and felt cleats, and special forms based on the customer’s requirements.
Request for a quote