Germany
Manufacturer/ Producer
Germany
For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. The installation of the Deflagration flame arrester into horizontal and vertical pipes is permissible. When equipped with one or two temperature sensors, the devices are protected under atmospheric conditions against a short time burning by a burning time tBT = 1.0 min. If only one temperature sensor, then it is to be placed on the device side where a burning could be expected.
Request for a quoteManufacturer/ Producer
Grotrian-Steinweg-Strasse 1C
38112 Braunschweig - Germany
Germany
Our patented desuperheater TECtemp HT L lance cooler is suitable for applications at temperatures up to 750 °C due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature area. The reduced weight of the steam lance has a positive effect on the support load of the steam line. The functional principle is based on the proved TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work.
Request for a quoteGermany
Our patented desuperheater TECtemp HT V venturi cooler is suitable for applications at temperatures up to 750 °C for small pipeline nominal diameters due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature range. The functional principle is based on the proven TECtemp desuperheater. The compact control unit can be removed easily and can be serviced individually for servicing work. This desuperheater is used as a compact solution for small pipelines with a high number of nozzles and small pressure loss requirements.
Request for a quoteGermany
Our variTEC ball valve is used for shut-off, control and safety functions (HIPPS). The ball valve provides universal possible applications for shut-off and/or regulation of the medium. This valve is suitable for almost every application due to the wide temperature range and the design with trunnion mounted ball, Double Piston Effect and Double-Block-and-Bleed function.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.