MALVIN SRL

Pre-mixed screed, 3 mm grit, damp earth type, fibre-reinforced with stainless amorphous metallic fibres, with high thermal conductivity, based on hydraulic binders, compensated shrinkage with rapid drying and controlled curing, ideal for Realization by hand or machine, also pressure pump, of background screed to be applied directly on any internal surface as long as it is stable and not subject to capillary ascent. Package: Bulk in silo-25 kg sacks-70 sacks-17.50 QL footboards RH Drying < 2%: 4 days Usage: Internal Color: Grey Particle size: ≤ 3 mm Yield: 18/20 kg/mq per cm thickness depending on the degree of comping Thermal conductivity EN 13813: λ = 2.03 W/MK Minimum application thickness Anchored screed cm 3 Float Screed cm 4 Screed on floor heating cm 3 above the ashlar Float screed on insulating mats > 6 mm cm 5 Compression resistance at 28 days EN 23892-2: ≥ 20 N/mm ² (C20)

Adhesive and lightweight premixed smoothener with glass balls based on hydraulic binders with high constant quality levels. The gluing and shaving of the insulating panels of polystyrene, polystyrene (also embossed), polyurethane, cork, cement wood inside and outside; The shaving of concrete surfaces, rustic, plastic and/or mineral coatings, traditional or premised plasters based on lime and cement both new and old, even if varnished, provided that in excellent condition, plasters which have lesions of Retraction, it will be made with lightened powder adhesive/wiper with glass beads, based on hydraulic binders type "Intocol PP LIGHT" Malvin S.R.L., applied by hand and kneading with the addition of water, with a consumption of 2/4.5 kg/sqm as glue and 2.5/3 kg/MQ as smoothing, with compression resistance to 28 days of category CS III.

Lightweight premixed screed with compensated shrinkage, dry and controlled drying, based on hydraulic binders and hollow glass spheres, ideal for hand or machine formulation, even pressure pump, of lightened background screed. Apply directly to any internal and external surface as long as it is stable and not subjected to capillary ascent, non-fissure, non-detached is breathable and resistant to impact, suitable to receive the subsequent application of any flooring and membrane Waterproof and cementitious waterproofing; Suitable for the realization of screed in general both inside and outside, lightweight screed, insulating under tile, for slopes and roofs, floating scree on a resilient mattress for the acoustic insulation of noise from trampling.

INTOIDRO ELS: Bi-component cementitious elastic membrane based on cementitious binders and special elastic polymers, anti aggressive and abrasion resistant for mineral waterproofings. INTOIDRO MONO: Cementitious elastic fibre-reinforced mono-component mortar based on cementitious binders and special acrylic polymers highly elastic, antiaggressive and resistant to abrasion for mineral waterproofings.

Concentrated latex to be mixed with cementitious mortars to optimize workability, adhesion, flexibility and resistance. To be mixed with cement or cement and sand for the creation of jet shooting Boiacas, low and high thickness mortars, fluid mortars for filling cracks, to be mixed with "Intomasso" to make screed 0.5-3 cm thick and to generally confer Greater plasticity and resistance to cementitious mortars and plaster in general, to improve adhesion characteristics, flexibility and water resistance of adhesives. To be used also as cement clinging with high penetrating power and insulating for external and internal, particularly suitable for the consolidation of inconsistent surfaces or flour; To improve the adhesion of background plasters or mineral coatings on smooth or poorly absorbent surfaces, concretes, weak, inconsistent or floured supports. Suitable for the consolidation of cementitious screets of low consistency.

PU MEMBRANE 450 is a one component, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures.

Cleansing solution with high professional penetration for indoor and outdoor waterborne and specific active chemical agents. wide spectrum of action specified for the cleaning of degraded surfaces by action of algae and moulds before painting. Treatment of high efficacy, double action: curative and preventive.

satinated and washable acrylic water-based paint with high-quality quartz for decoration and internal and external protection of both new and old surfaces such as plaster or cement base plasters, plaster-trimmed walls, concrete, plasterboard, wood and non-ferrous supports in general. Excellent for repainting, very high coverage, safe inalterability to atmospheric agents and ultraviolet rays. Washable, breathable, water repellent, antimould. Color: white and Color folder Package: Trunk 4-14 LT Usage: Indoor/outdoor Dilution: from 40% to 50% by volume with clean water • Roller ready to use Yield: 10/12 sqm/lt by hand, depending on the absorption of the support

acrylic mineral coating with quartz paste, for decoration and Protection of external and internal surfaces both new and old. based on lime and cement, water-repellent plasters, mineral finishes, coat system, premided coat plasters, stucco and concrete walls, old Coatings and synthetic paints, with spatula and sponged finish. It guarantees good breathability of the walls and excellent resistance to weather and alkali.

Acrylic mineral coating with quartz paste, for decoration and Protection of external and internal surfaces both new and old. based on lime and cement, water-repellent plasters, mineral finishes, coat system, premided coat plasters, stucco and concrete walls, old Coatings and synthetic paints, with spatula and sponged finish. It guarantees good breathability of the walls and excellent resistance to weather and alkali.