MaxTC Power+ was designed with high power and flexibility in mind, allowing for customization to suit different package and interface variations. The system allows for forcing temperature across a wide range of high power device sizes and types, whether socketed or soldered to board. With state of the art design and technology the Max TC Power Plus unit stimulates DUT to the desired temperature precisely and consistency by direct contact with a powerful thermal head. Powerful stand-alone Thermal control unit features: o Cooling Power -40°C@400W (steady state) o Ramp Rate up to 120°C/Min o Temperature stability: ±0.5°C o Temperature Range -75⁰C to 200⁰C o Minor temperature overshooting at high power spikes o Fast recovery time at high power spikes o Replace LN2, Thermostream, Chillers and Chambers o Remote controlled MaxTC Power+ is a stand-alone, plug&play unit, requires only: o AC Input; MaxTC: 208-240 VAC; 1~ 50Hz /60Hz 20A o Plug Type: NEMA L6-20 or 30 o
Germany
The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.
Request for a quoteNetherlands
The FlowFlex Rapid Lateral Flow Antigen Test Kit uses the latest patented technology to detect proteins, ensuring that it can detect new strains of the COVID-19 virus. Using a simple nasal swab within 2cm of the nose makes it extremely easy to administer an accurate test.
Request for a quotePoland
Devices testing hermeticity Devices testing electrical parameters Devices for geometry verification
Request for a quoteGermany
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.