Axial needle cage assemblies Axial needle cage assemblies, composed of synthetic or metal axial cage assemblies with integrated needle rollers, have an extremely low overall height. They tolerate high axial forces acting in one direction, radial forces must be taken up separately. The deployment of axial needle cage assemblies requires that hardened and bevelled thrust surfaces may be used as raceways. Thrust bearing washers Thrust bearing washers are punched, hardened and polished and can be used as shaft or housing washers. These washers are appropriate when the adjoining machine part when not hardened, is rigid enough and of a stable form. Axial needle bearings Axial needle bearings are components made up of axial needle rollers and cage assemblies and axial washers with centring bore. They can be combined with needle sleeves, needle bushes and needle bearings. The thrust surface for the cage assembly must be hardened and bevelled. The product types AXK and K are applicable here
Netherlands
IKO Roller Followers are bearings with needle rollers in the thick outer ring that are designed for outer ring rotation. There are separable and nonseparable models, double row cylindrical, and other models available. Roller Followers are widely used as follower bearings for various cam mechanisms and as guide rollers for linear motion in conveying equipment.
Request for a quoteChina
Hole Jewel contains a series of components that are chiefly applied as supporting bearings to the rotational systems of various accurate chronographs, auto-memorizing apparatus, precise instruments (micrometer, dial indicator) and other apparatus. Main types: Plane straight/olive holed bearing, single-cup plane straight/olive holed bearing, double-cups plane straight/olive holed bearing, raised olive holed bearing, and single-cup raised olive holed bearing, etc. ■Material Synthetic CZ/KY sapphire, ruby, single crystal α-Al2O3, natural agate, spinel, ceramic, etc.
Request for a quoteFrance
Slides steel. Ball cages steel. Balls, steel. Version Slides electro zincplated. Ball cages, electro zincplated. Balls hardened. Note for ordering Sold in pairs. Note On telescopic slides with partial extension both sides, the travel is less than the installed length. Latches in open position on both sides. The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used. The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 50,000 cycles. The load capacity is ca. 75% lower by horizontal mounting. The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide. Advantages Pulls out in both directions Latches in open position on both sides Light running
Request for a quoteCreate one request and get multiple quotes form verified suppliers.