MicroCoil heaters

In linguistic usage occasionally the terms coil heaters, nozzle heating elements, hot runner heating elements, cable nozzle heaters are used. Our HotMicroCoil heating elements can be used in a wide variety of applications. Their high level of plasticity ideally suits them to the heating of hot runner nozzles and for accurately heating the contours of three-dimensional surfaces. Many of our customers order HotMicroCoil elements in their unformed state of mineral insualted cable heaters and perform the subsequent shaping work themselves, while others commission us to shape and fit the heating cable elements. A large number of ready-to-fit heating solutions are available for plastic injection nozzles with clamping mechanisms, housing bezel, reflection tube or heat conduction sleeve.

HotCoils have a larger cross-sectional area and are thus capable of greater power than MicroCoils. For this reason they are used in hot runners with adequate space and where high heat densities are required. Owing to the large number of variants and for cost reasons, the sheath material for HotCoils is stainless steel - the standard for the market and thus also for Freek. HotCoils are large enough that thermocouples can be integrated into them. Our standard here is Type J (Fe-CuNi; red/blue), while Types J and K are also available conforming to the IEC and ANSI standards (see colour codes). Since the measurement point of a built-in temperature sensor is situated in the heater and never where the heat is actually required, a HotCoil with a thermocouple makes particular sense where the application allows the use of larger processing (temperature) windows or where the installation location or the design requires protection against overheating.

The Freek heat transfer nozzle heater type especially addresses manufacturers and users who operated their hotrunner nozzles with cast-in heaters in the past and would like to stick to their engineering know-how without paying the high price of this former heater design. The standard material of our patent pending Freek heat transfer alternative is brass, with or without coating, basically with a slit. Characteristics of our HotMicroCoil nozzle heaters sheathed by a reflection tube are easy mounting and variable heat distribution. Because of its direct touch and toleranced fit, the heater allows a very good heat transmission to the nozzle. In all our HotMicroCoils with reflection tube the assembly of a thermocouple is possible and recommended for bigger diameters and power. Also most common nozzle heater solutions are HotMicrocoil heating elements with clamp bands with diverse locking mechanisms.

Characteristics of our HotMicroCoils with reflection tube are easy mounting and variable heat distribution. Because of its direct touch and toleranced fit, the sleeve coil heater allows a very good heat transmission to the nozzle. In all our HotMicroCoil heaters with reflection sleeve the assembly of a thermocouple is possible and recommended for bigger diameters and power.