Germany
Manufacturer/ Producer
Germany
The family of UDHOME complete units can position power, data and multimedia connections exactly where they are required. Floor sockets and floor boxes of the UDHOME family are mounted directly on the raw floor or the screed and connected with flexible installation pipes ‒ it couldn't be simpler. Thanks to their elegant, discreet design, the UDHOME floor sockets and floor boxes integrate themselves seamlessly into the interior architecture. When the hinged lid is closed, only the high-quality surfaces of solid brass or pure stainless steel are visible. Thanks to their stable construction, the floor sockets and floor tanks are also resistant to the everyday loads in homes, offices and administrative areas. The and UDHOME9 floor boxes are the perfect solution for dry-care floor coverings and also stand out through a large range of equipment. The floor boxes offer a lot of space for the installation of power, data and multimedia connections.
Request for a quoteGermany
Soft, permanently elastic foam block for cable and combination insulation. Vertical and transverse installation to achieve different fire resistance classes. Can be combined with the two-component fire protection foam PYROSIT® NG. Can be used in solid ceilings and walls and in light-duty partitions and is approved for many installations. CE-labelled construction product according to ETA-15/0803 for applications with fire resistance periods of up to 120 minutes. Details on the applications can be found in the approval documents. Protect the surface of the insulation with foams against water in order to guarantee safe expansion in the case of fire. Coating with standard silicone is approved.
Request for a quoteGermany
The classic of service outlets Device covers for floor boxes OBO's service outlets supply workstations and other points in the middle of the room with power and data connections via the floor. The tried-and-tested GES9 underfloor service outlets now impress with a series of fundamental product improvements. Two versions are now available for opening the covers of the service outlets. The proven opening mechanism with handle is integrated in the cord outlet. Alternatively, service outlets with latching slides are available. This allows the lid to be opened effortlessly at any time. The new lid design also ensures greater stability of the entire service outlet. The floor covering recess in the lid can be easily increased from 5 mm to 10 mm by using the enclosed spacer frames.
Request for a quoteGermany
Cassette R9, with cord outlet, V2A, floor covering 25 mm, as connection unit according to EN 50085-2-2, for installation in mounting opening in underfloor installation systems and raised and cavity floors indoors, for use in dry rooms with dry-cleaned floors, height adjustable to top floor edge, consisting of: Cassette with slip-proof cord outlet with handle and inserted sheet steel cover, cassette with seal, cassette frame with integrated snap-in ladder for installation of 3 universal supports for 9 single installation devices with support bracket or 12 Modul 45 devices and cable guide bracket with integrated scuff protection, 4 levelable supports. Classification according to EN 50085-2-2: Application area: for dry floor care (6.101.1). IP protection class: IP 30. IK protection class: IK 10. Load capacity: 3,000 N (6.102.7) 5.000 N (6.103.3)
Request for a quoteGermany
The round floor sockets of the GES R2 series supply data and power exactly where they are required. Depending on the cover version, the floor boxes are suitable for dry or wet-cleaned floors. OBO GES R2 are an ideal underfloor solution when a discreet appearance, a high load capacity and varied functionality are required. Whether in the living room or in public areas ‒ such as foyers, shopping malls or exhibition areas – the floor boxes stand out due to their fine design and also add value to high-quality floor areas. More connection space The installation socket of the GES R2 is pre-equipped with two sockets. To the side of the socket, there is space for up to two data connections, as an option. Socket connection is simple: The connection cables are inserted in the compact installation space and that is closed off with a cover. The ideal floor socket ‒ also for wet-cleaned floors
Request for a quoteGermany
Hanging handle in lengths from 200mm to 1200mm, made of U-profile with welded head plate. Particularly versatile due to design with special perforation on three sides. Fastened to horizontal concrete ceilings with dowels approved by building authorities. Two-sided cantilever mounting possible with standard wall cantilevers.
Request for a quoteGermany
Hanging handle in lengths from 200mm to 2000mm, made of U-profile with welded head plate. Particularly versatile due to design with special perforation on three sides. Fastened to horizontal concrete ceilings with dowels approved by building authorities. Two-sided cantilever mounting possible with standard wall cantilevers.
Request for a quoteGermany
The fire protection bandage is used as cable insulation for individual cables, cable- and electrical installation pipe bundles (EIR). The insulation consists of a flexible bandage, fixed using wire. When surrounding the cables, take account of how often the appropriate medium must be surrounded. Refer to the approval for details. The bandage can be used directly next to Rockwool pipe insulation. Winding wire is included.
Request for a quoteGermany
Halogen-free junction box with pre-mounted, soft plug-in seals, approved for maintaining electrical functionality according to DIN 4102 Part 12. Maintenance of electrical functionality to classes E30 to E90. Colour: Pastel orange. Including pre-mounted connection unit made of high temperature-resistant special ceramic and labelled protective conductor terminal. Supplied with fuse holder TE-FH 520 for VDE-conformant, reaction-free protection of consumers and 2 fire protection screw ties MMS 6x50 for anchorless fastening. Power cable nominal cross-sections: 1.5 to 10 mm² depending on the type, data cables with 0.8 mm wire Ø. Several rigid copper wires with smaller cross-sections per terminal possible. High protection rating IP66, impact resistance class IK08. Details on the cable types and manufacturers can be found in the general construction test certificate of the material testing institute NRW, Erwitte.
Request for a quoteGermany
Combination arrester, type 1+2, for mounting on 40 mm busbars, for TN-S and TT systems • Protection level ≤1.5 kV to protect the terminals • Lightning protection equipotential bonding according to VDE 0185-305 (IEC 62305) • Lightning current arresting capacity up to 100 kA (10/350) 3+NPE • Fulfils the requirements of VDE 0100-534 (IEC 60364-5-53) • Line follow current quenching up to 50 kA and max. backup fuse up to 315 A gL/gG • Spark gaps for use in the pre-meter area according to VDE-AR-N 4100 Application: Building with lightning protection or outside cable infeed.
Request for a quoteManufacturer/ Producer
Hüingser Ring 52
58710 Menden - Germany
Turkey
Novelty Steel is an experienced fabricator of structural steel fabrications for plant constructions such as Bulk Handling Equipment, HRSG plants, Steel and Wood Industries. Some examples of the fabrications are: Steel Silos and tanks Inlet Ducts and Silencers Stair Towers Bunkers and Hoppers Pipe Supports Exhaust Stacks Our modern steelwork fabrication shops have computer-aided design and detailing (CAD), which is linked directly to factory floor computer numerically controlled (CNC) machinery, creating a genuine seamless CAD/CAM environment. The accuracy of the computer-generated details being transmitted directly to the CNC machinery increases the quality standards of the production. Novelty Steel has adapted EN 1090-2 standards into its manufacturing processes supervised by experienced quality management team.
Request for a quoteGermany
WDM Deutenberg produces corrosion-resistant cable conduits. We permanently guarantee to fulfill your high security standards for functional integrity in case of fire, earth quake or vandalism.
Request for a quoteGermany
Variable cable routeing with superior strength and durability Open, robust wire-tray trunking systems offers excellent cable routeing solutions in challenging industries such as telecommunications and IT, the food industry and chemical industry as well as machinery and equipment. The system is approved in accordance with UL and DNV for offshore use. Your advantages: Open, easy to manage cable layouts Safe, very strong and corrosion-resistant construction Easy assembly and installation with two tools and two types of connectors Easy to clean, good ventilation Wire-tray Trunking is available in various cross sections from 53 mm x 46 mm to 620 mm x 110 mm and in heights of 60 mm and 100 mm, as mini-trunking from 40 mm x 20 mm in U-, C- and G-formats and as flat trays.
Request for a quoteGermany
Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.