Germany
Manufacturer/ Producer
Germany
European Technical Assessment for cracked and uncracked concrete, as well as for masonry of full and hollow brick. Earthquake-proof in concrete according to Category C1. Fire protection approval for concrete and masonry with fire resistance classes up to 120 minutes. Substrate temperature during processing –10 °C to +40 °C (concrete), ambient temperature after complete hardening –40 °C to +120 °C (in concrete). Will keep for at least 18 months if stored in a dark, cool and dry place. The injection mortar has a European Technical Approval (ETA) for cracked and uncracked concrete, as well as for masonry of full or hollow brick. It is earthquake-proof according to performance category C1 and has fire protection approvals for concrete and masonry with a fire resistance class up to 120 minutes. The injection mortar is worked with a pressing gun, type VM-P 345 Profi, or a standard silicone press.
Request for a quoteGermany
RAIL SYSTEMS Rail systems from OBO The robust rail systems are used worldwide together with numerous other OBO products. For example, as suspension for cable support systems, as fastening rails for bracket clips for cable routing or as mounting rails. In addition to different load classes, the rails are of course also available in various widths and with a selection of hole patterns. Depending on the application, the rail range is available in two surfaces: strip galvanized and hot-dip galvanized, as well as in stainless steel grades V2A and V4A. Different load ranges for OBO's rail systems OBO's tried-and-tested rail system is now even more clearly sorted. At a glance, you can now choose from three load ranges: light, medium and heavy. The matching accessories can also be found directly in the selection aids. This makes it easy to choose the right products for the job.
Request for a quoteGermany
Bracket, width 210 mm, light-duty version, folded, fastening on U suspended support or concrete wall. Corrosion protection: Strip galvanised according to DIN EN 10346 Dimensions: 210 x 65 mm Width: 210 mm Load capacity: 1.2 kN Make: OBO Bettermann Type: MWA 12 21S FS Item no. : 6424732
Request for a quoteGermany
Wall bracket, width 210 mm, medium-duty version, with welded head plate, for fastening on U suspended supports and concrete walls. Corrosion protection: Hot-dip galvanised according to DIN EN ISO 1461 Dimensions: 210 x 70 mm Width: 210 mm Load capacity: 3 kN Make: OBO Bettermann Type: AW 30 21 FT Item no. : 6419720
Request for a quoteGermany
RAIL SYSTEMS Rail systems from OBO The robust rail systems are used worldwide together with numerous other OBO products. For example, as suspension for cable support systems, as fastening rails for bracket clips for cable routing or as mounting rails. In addition to different load classes, the rails are of course also available in various widths and with a selection of hole patterns. Depending on the application, the rail range is available in two surfaces: strip galvanized and hot-dip galvanized, as well as in stainless steel grades V2A and V4A. Different load ranges for OBO's rail systems OBO's tried-and-tested rail system is now even more clearly sorted. At a glance, you can now choose from three load ranges: light, medium and heavy. The matching accessories can also be found directly in the selection aids. This makes it easy to choose the right products for the job.
Request for a quoteGermany
Underfloor junction and branch box UZD 165220 250-3 with side walls made of sheet steel as a system component of screed-covered electrical installation systems according to EN 50085-2-2, with quick adjustment of the box height; with screed-flush outlet edge; with internal continuous height adjustment; with acoustic decoupling option after screed laying; with protective mounting cover. The nominal size of the device installation unit is determined during final installation by selecting the appropriate installation cover. The installation space of the box increases with leveling to the upper edge of the screed. The side walls are perforated according to the nominal duct sizes (duct width: 250 ÷ 250 mm, duct height: 28 ÷ 48 mm). Material: steel, FS Screed take-off edge: aluminum screed height: 165 ÷ 220mm installation space: 15,66 ÷ 21,2 dm³ Nominal size for device installation units: 250 Fabrikat: OBO BETTERMANN Typ: UZD 165220 250-3 Art.-Nr.: 7410052
Request for a quoteGermany
METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design
Request for a quoteGermany
Hanging handle in lengths from 200mm to 1200mm, made of U-profile with welded head plate. Particularly versatile due to design with special perforation on three sides. Fastened to horizontal concrete ceilings with dowels approved by building authorities. Two-sided cantilever mounting possible with standard wall cantilevers.
Request for a quoteGermany
Heavy duty cassette 9 "for tube", V2A, 10 kN, floor covering thickness 21 mm, for installation in square mounting opening in screed-covered trunking system and raised and cavity floors indoors, suitable for static loads up to 10 kN, for use in dry rooms with wet-cleaned floors according to DIN VDE 0634, height adjustable to top floor edge, consisting of: — Cassette with installation opening for tube, with seal and inserted sheet steel cover, — cassette frame with integrated snap-in ladder for installation of 3 universal supports UT4 for 9 single installation devices with support bracket or 12 Modul 45 devices, — 4 levelable supports. Material: Cassette frame, cassette made of V2A sheet metal, 2 mm. Insert cover: galvanized steel sheet, 8 mm. Depth of the recess in the cassette for the floor covering in mm: 21. Required mounting opening in mm: 244x244 mm. Required minimum installation depth: 132 mm. Leveling range: +18 mm.
Request for a quoteGermany
The family of UDHOME complete units can position power, data and multimedia connections exactly where they are required. Floor sockets and floor boxes of the UDHOME family are mounted directly on the raw floor or the screed and connected with flexible installation pipes ‒ it couldn't be simpler. Thanks to their elegant, discreet design, the UDHOME floor sockets and floor boxes integrate themselves seamlessly into the interior architecture. When the hinged lid is closed, only the high-quality surfaces of solid brass or pure stainless steel are visible. Thanks to their stable construction, the floor sockets and floor tanks are also resistant to the everyday loads in homes, offices and administrative areas. The and UDHOME9 floor boxes are the perfect solution for dry-care floor coverings and also stand out through a large range of equipment. The floor boxes offer a lot of space for the installation of power, data and multimedia connections.
Request for a quoteManufacturer/ Producer
Hüingser Ring 52
58710 Menden - Germany
Turkey
Novelty Steel is an experienced fabricator of structural steel fabrications for plant constructions such as Bulk Handling Equipment, HRSG plants, Steel and Wood Industries. Some examples of the fabrications are: Steel Silos and tanks Inlet Ducts and Silencers Stair Towers Bunkers and Hoppers Pipe Supports Exhaust Stacks Our modern steelwork fabrication shops have computer-aided design and detailing (CAD), which is linked directly to factory floor computer numerically controlled (CNC) machinery, creating a genuine seamless CAD/CAM environment. The accuracy of the computer-generated details being transmitted directly to the CNC machinery increases the quality standards of the production. Novelty Steel has adapted EN 1090-2 standards into its manufacturing processes supervised by experienced quality management team.
Request for a quoteGermany
WDM Deutenberg produces corrosion-resistant cable conduits. We permanently guarantee to fulfill your high security standards for functional integrity in case of fire, earth quake or vandalism.
Request for a quoteGermany
Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.
Request for a quoteGermany
Variable cable routeing with superior strength and durability Open, robust wire-tray trunking systems offers excellent cable routeing solutions in challenging industries such as telecommunications and IT, the food industry and chemical industry as well as machinery and equipment. The system is approved in accordance with UL and DNV for offshore use. Your advantages: Open, easy to manage cable layouts Safe, very strong and corrosion-resistant construction Easy assembly and installation with two tools and two types of connectors Easy to clean, good ventilation Wire-tray Trunking is available in various cross sections from 53 mm x 46 mm to 620 mm x 110 mm and in heights of 60 mm and 100 mm, as mini-trunking from 40 mm x 20 mm in U-, C- and G-formats and as flat trays.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.