Gas flow meter OPTISONIC 7300
Gas flow meter / ultrasonic / in-line
Description
The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F). Using the transit time differential measuring principle, the OPTISONIC 7300 delivers high performance over a wide flow range (up to DN600 / 24", turndown ratio: 100:1). The measured volume flow can always be calculated to standard conditions using the input of temperature and pressure sensors, which can be directly connected to the device. Following the initial calibration, the device provides accurate measuring results (±1% error of measured value). The OPTISONIC 7300 does not have the limitations associated with turbine or other traditional gas flowmeters like periodical recalibrations, maintenance, pressure loss and a limited flow range.
Product characteristics
- Fluid:
- for gas
- Technology:
- ultrasonic
- Other characteristics:
- in-line
Similar products from KROHNE MESSTECHNIK GMBH
KROHNE MESSTECHNIK GMBH
Germany
The DK46/47/48/800 is a variable area (VA) flowmeter for monitoring and adjusting extremely small flow rates of liquids and gases. It is thus particularly useful for sample flow monitoring in analyser systems and gas chromatographs or measuring liquids and gases in laboratories and pilot installations. The purgemeter operates without auxiliary power supply and is available with different glass tube and installation lengths from 90 to 325 mm / 3.55 to 12.8". The medium is visible and the flow value can be read directly off the scale at the height of the float. The glass flowmeter can be provided with max. two limit switches (NAMUR) or a 3-wire digital output. For precise setting of the flow value, the VA meter features a needle valve. The DK 46/47/48/800 is also available with a differential pressure/flow regulator to provide constant flow rates in case of varying inlet or outlet pressures. The device has approvals for use in hazardous areas.
KROHNE MESSTECHNIK GMBH
Germany
The OPTIFLUX 1000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 1050, OPTIFLUX 1100 and OPTIFLUX 1300 electromagnetic flowmeters for water and other conductive, non-abrasive media and OEM machinery applications.
KROHNE MESSTECHNIK GMBH
Germany
The DK32/34 is a variable area (VA) flowmeter for measuring low flow rates of liquids and gases. The tried and tested meter is particularly suitable for flow monitoring and dosing in gas analyser systems or on purge panels. Due to its robust all-metal design it can also be used in difficult process conditions with temperatures up to +200°C / +392°F or pressures up to 400 barg / 5800 psig. It is available with a metering valve as standard to accurately set the flow value. The DK32/34 operates without auxiliary power supply. The device just features a local indication with two optional MIN/MAX limit switches (NAMUR) or a reed contact. To provide constant flow rates in case of variable inlet or outlet pressures, the VA meter is also available with flow regulators. It comes with horizontal or vertical process connections for NPT or G thread and many other connection options. The VA meter has various approvals for hazardous areas.
KROHNE MESSTECHNIK GMBH
Germany
The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100 and OPTIFLUX 4300 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.