ORME PACKAGING CO.LTD.

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.

Impulse heat sealer for closing and coding plastic tubes of variable height, from 105 mm to 220 mm, with diameter up to 50 mm (60 mm with optional). Simple and compact with electromagnetic operation and innovative temperature control that constantly monitors, cycle after cycle, the real sealing temperature. CE certified. The TUBO3 heat sealer for tubes can seal tubes starting from 20 mm in diameter and 105 mm high. On request it is possible to make a special tube holder for tubes with a diameter of 20 mm and a height of 70 mm. However, it is not possible to seal tubes with a diameter of less than 20 mm and a height of less than 70 mm.

Wrapping machine constituted by tubular structure on which it is possible to hang the garment already pre-packaged in the upper part. The machine is equipped with sealing bar air that allows the lower welding of the hanging clothing. Sealing width 80 cm. with pneumatic closure bar. Built-in pressure regulator. The sealing is made by pneumatic closing of the bar. You can also change the height of welding in a practical and fast by pneumatic control. In the standard version the adjustment ranges of about 50 cm. On request it is possible to change the height of the weld. Operation: The operator hangs the dress already bagged the top and insert the edges of the bags in the sealing bars. Through the dedicated command adjusts the height of the sealing bar and closes. Operand button welding makes the closure of the envelope. The sealing cycle is indicated by a warning light and can be adjusted up to about 1.

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged.