France
Manufacturer/ Producer
France
The POITTEMILL pendulum roller mill is a vertical mill that works by compressing the material bed. The pendulums mounted on a star wheel are driven by a vertical shaft. Each pendulum is fitted with a grinding roller that rotates upon its axis. The rotation of the star wheel combines with the articulation of the pendulum to generate a centrifugal force at the grinding roller level. The product is ground between the grinding roller and the fixed bull ring.
Request for a quoteFrance
The HighYield Pulverizer PHR is a mill that combines the actions of attrition, impact and shearing. It can be equipped with different rotors that accentuate the effects of attrition or impact. The design integrates easy access for maintenance and the replacement of wearing parts. The mechanical parts are situated outside of the grinding chamber to protect them from damage from high temperature drying. Different manufacturing materials are available for the wearing parts as well as ceramic materials for abrasive products that need to avoid contamination by metallic particles. The PHR provides grinding / drying operations for a feeding product of up to 85% humidity. When associated with a Dynamic classifier, very fine particle sizes can be obtained.
Request for a quoteFrance
The Cylinder mill, commonly known as the Roller Press works by crushing the material between two cylinders kept under pressure by a hydraulic system (2 to 10 T/linear cm). This mill uses a patented process of pulsating pressure that reduces the level of vibration and contributes in reducing energy requirements and prolonging the service life of wearing parts. It is able to treat high production capacities (up to 500 T/h) and produce fine particle sizes (10 to 1000 microns). Cylinder mills allow for energy savings of up to 30% compared with mills that use traditional crushing methods. The cylinders are equipped with an antiabrasive coating which combined with their slow processing speed provide the grinding solution with the longest service life on the market.
Request for a quoteFrance
The PAS integrated classifier mill is designed to treat a wide variety of products obtaining a particle size of 99% down to 10µm. The PAS is equipped with a grinding plate and integrated classifier that are driven independently by frequency variation motors. Different versions of the PAS are available, giving a wide flexibility in terms of installation and usage. The variety of grinding tools (plates, liners) when associated with a variable speed static and dynamic classifier guarantees a high quality ultrafine finished product for all applications. The PAS can be equipped with our latest patented technologies SEALMAX© new generation classifier, OPTICYCLE© internal ultrafine recycling system.
Request for a quoteFrance
The ATTRIMILL is an attrition mill (or kinetic mill) principally used for plastics or fibrous products. It combines three physical principles that generate efficient ultrafine grinding. The autocomminution of the particles generated by the upward air spiral, The comminution of the particles created by pressure changes generated by variations in the air flux /matter projections against the blades and the stator, The shearing of the particles between the blades and stator grooves. The internal design of the mill depends upon the type of product and the required fineness. The range is divided into several versions according to the sector of activity and products to be treated Stainless steel for foodstuffs, pharmaceuticals or chemicals, ceramic lining for abrasive products, resistance to an accidental explosion (PSR 10 bars) etc... We have a full range from the ATM8 (several kg/h) up to the ATM600 (up to 25t/h).
Request for a quoteFrance
The HammerKnife Universal Mill is the combination between a Hammer Mill and an Universal Mill. As the FORPLEX FNG Mill it can be equipped with different grinding tools (hammer plate ou blade plate) which are adjustable in relation to the product to be ground. The FK Mill has the same advantages as the Universal Pin Mill FNG easy to use, easy to clean, easy to maintain, but also simplicity of changing the grinding tools or grids. Perfect for technical applications such as the grinding of natural ingredients (knife rotor designed for the crushing of plants), the FK mill was designed to meet the standards of the foodstuffs industry, fine chemicals industry, pharmaceuticals industry, nuclear industry or even for cosmetics. It can meet FDA, GMP or ANIA standards and criteria. With the robustness and strength of hammer crusher
Request for a quoteFrance
The MA (or Hammer mill) is an impact grinder that crushes the input material between the hammer (or knife) plate and a stator fitted with a sieving screen perforated for the required particle size. It is generally used as a pregrinder positioned upstream of a grinding installation. The MA breaks up blocks of raw material into smaller particles capable of being treated by a mill for fine grinding.
Request for a quoteFrance
The Universal FNG mill is an impact grinder that has the key advantage of being fully adaptable. It can be equipped with different grinding tools (hammer plate, pin plate or blade plates) which are adjustable in relation to the product to be ground. The particle size obtained is adjustable via a wide range of sieving screens with varying perforation sizes. Cleaning and maintenance of the FNG is easy. The Universal mill is equipped with air insufflation at bearing level to eliminate all risk of crosscontamination in the case of multiproduct use. The extensive FNG range starts with the FNG 00 laboratory mill (see Labline range) and the FNG1 leading up to the FNG7 for important production capacities.
Request for a quoteFrance
Rotating lumpbreakers are designed to break crumbly products under the form of agglomerated blocks or lumps. LABLINE lumpbreakers have been designed with various formfactors in order to meet various customer requirements. The ELX lumpbreaker can be easily cleaned, and access to the inside and to parts in contact with the product is easy. Usually fitted with a knife rotor, the ELX lumpbreaker can also be used with a blade rotor, better suited for finer products that tend to clog. Fineness depends on the perforation of the sieving screen. Thanks to the low rotation speed, the FORPLEX lumpbreakers can work without damaging the product proprieties, in particular without heating and without producing powder
Request for a quoteFrance
The R&D Grinding Unit FPX is a variant of the Forplex Universal Mill (FNG). Presenting the same characteristics as the FNG, it allows however the processing of larger batches than FNG00 or BLX. This mobile grinding unit is used for small industrial productions. As others laboratory mills, the FPX main body is made of a machined 316L stainless steel single block, without any wielding, in order to avoid any product retention inside the mill. It may be installed in various ways, according to requirements On a mobile platform, In a closed (mobile) unit Within the production line
Request for a quoteManufacturer/ Producer
Technoparc Futura
Rue de l'université
62400 Béthune - France
Turkey
It is designed for separating flour particles stuck on bran and remaining in bran in flour and semolina factories. The flour and ash particles in the bran are separated and brought into the system and the efficiency is increased and efficiency is provided.
Request for a quoteTurkey
Grizzly screens are typically constructed by welding steel rails, rods, or bars into grids with a specific pattern. The selection of rails can vary in size, ranging from about 7.4 kg/m to approximately 225 kg/m. These rails generally run parallel to each other along the entire length of the screening surface. The spacing between the rails typically range from 5 to 200 mm. To facilitate the smooth flow of materials, the openings are often tapered, with the top being wider than the bottom. Heavy-duty grizzly bars are commonly cast from manganese steel and feature double tapers. These grizzly screens are designed to receive large lumps of ore from sources such as railroad wagons, tipper cars, and other bulk material handling systems that discharge materials from considerable heights. As a result, they are constructed to be exceptionally robust to withstand the impact and handling of heavy materials.
Request for a quoteTurkey
Cone Crusher Spares: *Cone Mantle Liner *Hopper Assembly *Oil Flinger *Countershaft Bushing *Frame Seat Liner *Frame Pin Bushing *Upper Thrust Bearing *Socket Liner *Eccentric Bushing *Head Upper Bushing *Head Lower Bushing *Main Shaft *Adjustment Ring *Counterweight Liner *Feed Cone *Torch Ring Jaw Crusher Spares: *Crusher Jaw Block *Crusher Jaw Pitman *Jaw Plate *Crusher Jaw Wedge *Crusher Mast Bed *Pitman *Crusher Jaw Casting *Wedge Bolt Tertiary Crusher Spares: *Tertiary Bed *Tertiary Rotor *Tertiary Palette *Tertiary Shaft *Tertiary Rib VSI *Vertical Shaft and Sleeve *Vertical Shaft Rotor *Vertical Shaft Diamond *Vertical Shaft Distributor *Vertical Shaft Feed Eye Ring
Request for a quoteChina
Jaw plate and Side plate for Jaw crusher; Mantle, Concave for Cone Crusher; Blow bar and Hammer for Impact Crusher and Hammer/Metal crusher; Roller and Ring for Raymond Mill; Roller Liner and Disc Liner for Sand making VSI Crusher, Chocky bar and Wearing button for Excavator, which is in the material of High Manganese Steel Mn13Cr2/ Mn14Cr2/Mn17Cr2/Mn18Cr2/Mn22Cr2; High Chrome White Iron Cr20/Cr22/Cr24/Cr26, and its with Mo, Ni, Re, Ceramic, Alloy, Bi-metal etc wear-resistant materials. And HUAN-TAI products support for Shanbao, SBM, Liming, Shibang, Zenith, Metso, Sandvik, Barmac, Trio, TEREX, Pegson, Powerscreen, Kleemann, MINYU, Symons, Hazemag, Cedarapids, McClosey, Keestrack, Telsmith, Russian brands and other famous brands machine. We also can produce the wearing spare parts as per customers’ own drawings
Request for a quoteCreate one request and get multiple quotes form verified suppliers.