POLIFIBRA FOLIEN HANDELSGESELLSCHAFT MBH

POLIFIBRA assembled a wide range of insulating films that are based on polyester films. The polyester film usually is transparent, flexible and has a high mechanical strength. It is highly resistant to oil, grease and solvents and contains no plasticizers. Under normal operating conditions in the isolation area is polyester (Product: polyester film) aging. The electrical properties of the film are very good. Polyester film is used in practice in temperature ranges from -60 ° C to 150 ° C in many industrial applications. In the field of electrical insulation films are generally used in thicknesses 12μ to 350μ. The polyester film has excellent mechanical strength and has a high resistance to oil, grease and solvents in general good compatibility with impregnating agents on. Their electrical properties have been proven for many decades in the electrical industry. Although polyester in the thermal class B is classified, it can also allow for higher

From POLIFIBRA processed as composite polyester films UL and IEC / CEI are tested. We laminate polyester films with one or more flexible materials. So can be made, for example composite films made of polyester, pressboard, fabrics, metal foils, fleece, Nomex *, etc. By the connection of different materials, the characteristics of the individual products can be significantly improved: greater tear and tensile strength higher tearing or tear propagation resistance Advanced heat resistance up to 180 ° C (class H) favorable conjunction with impregnating agents improved heat dissipation Avoid oxidation polyester better insulation Cost reduction in the production

Under prepreg is meant the reinforcing fibers that are already impregnated with resin. Upon heating, the resin liquefies briefly and steeped the fibers before it begins to harden. Prepregs offer especially for complex components high performance and a very wide range of application.

Heat Stabilizing films are polyester films, which do not shrink at heat treatment. They form the basis for the printing of electrical elements and are ideally suited for further processing. If you to have any further questions then please do not hesitate to contact us. We will be happy to explain what to look for heat stabilizing films and what qualities must have the films.

Caps and stampings we can deliver the most diverse materials. Size, type and form are in this case matched to the customer's wishes and are manufactured according to customer drawings. Sit down just contact us and we will help you in designing a suitable product for your needs. Tubes and tube sections By combining different materials, the applications are widely held. These range from the electrical insulation of components of chemical protection through to thermal protection elements and cables. Depending on customer requirements, our tubes and cores are already manufactured to the desired level and then shipped as cargo.

In the cable industry films are used particularly suitable for shielding electrical conductor, as a separating and insulating films or moisturizing protection. Thus, polyester films, because of their physical and chemical properties both in data and communication cables as well as power cables used. The high tensile strength, low weight per unit area, a high degree of flexibility and good electrical properties are important criteria for the selection of the film set in the cable production.The permanently constant physical and chemical values of the polyester films, as well as the tight tolerances in the film thicknesses allow the use of POLIFIBRA products even in very demanding end-products in data and power cable area. The polyester film is a transparent, flexible film with excellent mechanical properties. The electrical properties of polyester films are very good, so they come in the field of data and communication cable with a thickness of usually 12µ - 50µ for use.

Most people are known plastic films to protect food in the household. The POLIFIBRA films GmbH manufactures and assembles polyester and laminated films, which are used because of specific character in different industrial manufacturing sectors. POLIFIBRA provides polyester films with different strongly adhering surfaces. In our product POLI BOND the surface of the PETP film on or treated on both sides in varying degrees. This can be a very significant improvement in the adhesion of coatings to be achieved. POLI BOND can in the film thicknesses 19µ - 350µ are delivered.Different printings require different surfaces. In addition to highly transparent or colored opaque base films we offer here at various coatings that allow easy and quick editing. Seal foils are coated films, the above-defined temperature ranges enable an activation of the coating so as to allow bonding of different products. POLIFIBRA films offers solutions for different temperature ranges and applications.

Polyester films are usually transparent, flexible and have a high mechanical strength. Polibond is a polyester film with a special transparent matt surface. The chemical primer changes the surface structure of the polyester film and this enables greater adhesion to the surface. The strength of the adhesion can optionally be changed. Polibond has excellent anchorage values ​​for impregnating agents.