PROPACK DICHTUNGEN UND PACKUNGEN AG

Germany

Factory icon Manufacturer/ Producer

Verified by Europages badge
PROPACK DICHTUNGEN UND PACKUNGEN AG

Germany

Verified by Europages badge

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Germany

Verified by Europages badge

100 % virgin PTFE, modified and filled with Barium sulfate Characteristics Protected against cold flow Excellent recovery Excellent chemical resistance in caustic applications Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness WHITE 08 / 0.8 mm WHITE 10 / 1.0 mm WHITE 15 / 1.5 mm WHITE 20 / 2.0 mm WHITE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards, special dimensions on request.

Germany

Verified by Europages badge

D 5 Prophit High Temperature Gasket of Expanded Flexible Graphite with and without reinforcements Characteristics Temperature range in inert environment up to +3000 °C (attention: reinforcement inserts cause temp limits) Permanent elasticity, resilience approx. 10 % Non ageing - does not contain binding compounds High pressure resistance Radiation resistance and excellent media resistance Main application Flanges Sight glasses Valve bonnets Pipe flanges Suitable for Chemical industry Petrochemical refineries and steam production Pharmaceutical industry Power plant technology Paper industry Sugar industry Form of delivery Sheets or custom die cut rings With inner or/and outer crimp: mat. 1.4571 0.15 mm thick, seamless pressed Other materials and designs on request.

Germany

Verified by Europages badge

High Temperature Gasket of Expanded Flexible Graphite with Stretchmetal Characteristics Expanded graphite sheet gasket with Stainless Steel stretch metal reinforcement and a purity of 99 %. Practically no cold flow or creep under temperature. Non hardening Excellent in use with cycling temperatures. Blow out safe due to 3 dimensional reinforcement matrixes Optimized transfer of sealing stress Safe use even with small sealing width Minimized risk of separation known from multilayer reinforced gasket sheets. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, n oxidizing atmosphere +450 °C Pressure: p = 200 bar Main application Universal use as problem solver in all industries when demanding higher operation safety and sealability especially in older plant equipment. Suitable for Chemical industry Petrochemical plants Pharmaceutical industry Power plant technology Paper industry Sugar industry Approvals DVGW BAM TA Luft FIRE SAFE API 607 on request Form of...

Germany

Verified by Europages badge

Gasket Sheet of Expanded Graphite, both sides with impregnation Characteristics Soft and extremely adaptable non reinforced graphite sheet with a purity of 99.85 %. Special coating on both sides raises sealabilty. Practically no cold flow or creep under temperature. Non hardening Excellent in use at cycling temperatures Excellent sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Sensitive Flange connections like sight glasses, glass- or glass lined flanges in all industries. Suitable for In all industries Approvals BAM DVGW KTW Variant Economic grade alternative D 5.0 on request. Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.0 / 1.5 / 2.0 mm or cut gaskets according to drawing, or EN and international Standards Special dimensions on request.

Germany

Verified by Europages badge

Sheet gasket from expanded graphite with tanged stainless steel foil reinforcement Characteristics Graphite gasket reinforced with a 0.1 mm tanged stainless steel insert and a purity of 98 %. Practically no cold flow or creep under temperature Excellent in use at cycling temperatures High blow out safety Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 100 bar Main application Robust graphite gasket applicable in all industries and as well approved to seal older equipment. Suitable for In all industries Approvals BAM DVGW FIRESAFE Variant Economic grade alternative D 5.1 in 0.1 mm 316 tanged stainless steel sheet reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.5 / 2.0 /3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Germany

Verified by Europages badge

High temperatur sheet gasket from expanded graphite with stainless steel foil reinforcement Characteristics One layer of 0.05 mm stainless steel carrier (3 mm thickness 2 layers) with graphite on both sides fixed by a special only 10 µm thick adhesive coating. Purity 98 % Practically no cold flow or creep under temperature Excellent in use at cycling temperatures Very good sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Suitable for sensitive flange connections Housings of pumps and fittings Suitable for In all industries Approvals BAM DVGW Variant Economic grade alternative D 5.2 with 0.05 mm stainless steel foil reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in der Dicke 0.55 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Germany

Verified by Europages badge

Sheet gasket from expanded graphite with multilayer stainless steel foil reinforcement Characteristics Premium graphite gasket, reinforced by 0.05 mm multilayer stainless steel carriers in an adhesive free sandwich compound with the graphite layers. Purity 99.8 % High blow out safety and mechanical strength Practically no cold flow or creep under temperature Non hardening Excellent in use at cycling temperatures Reduced Emissions due to high sealability Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 250 bar Main application Highly recognised as problem solving gasket material in all industries with higher pressures and temperatures and the demand on operation safety and sealability Suitable for In all industries Approvals BAM DVGW TA Luft FIRE SAFE API 607 Variant Economic grade alternative D 5.3 with multiple 0.05 mm stainless steel foil...

Germany

Verified by Europages badge

Formstable biaxially expanded ePTFE sheets or die cutted gaskets Characteristics Excellent adaption High blow-out resistance No cold flow Chemically inert Technical parameters pH 0 - 14 Temperature: t = -200 … +280 °C Pressure: p = Vacuum … 200 bar Density: 0,95 g/cm 3 (D11 - 0,7 g/cm 3) Minimum Surface pressure: VU (40 bar; 0,01) = 26 Mpa Maximum Surface Pressure: VO = 150 Mpa Minimum surface pressure in operation: BU < 5 Mpa Cold upset compression value: KSW = 40 % Remaining Thickness after compression approx. 15 % higher than values of D11. Main application Flanges Vessels Lids Joints Narrow flanges Bigger uneveness Tension sensitive components (e.g. sight glasses) Suitable for Chemical industry Food industry Maintenance Approvals DIN 28090-2 TA Luft 1,5 · 10 -8 mbar · l/(s·m) @ 250 °C FDA conformity EG 1935:2004 EU 10/2011 Form of delivery Sheet dimension: 1,000 x 1,100 mm and 1,500 x 1,500 mm Sheet gaskets thicknesses: 0.5 / 1.0 / 1.5  / 2.0  / 3.0  / 4.0 / 5.0...

Germany

Verified by Europages badge

Hand-, Head- and Manhole Gasket the Safety Gasket for Steam Boilers and Vessels Characteristics The new gasket quality novaSEAL HP is made out of a high performance, temperature, corrosion and chemical resistant woven fabric. Technical parameters Temperature: t = +250 °C Pressure: p = 40 bar Main application Steam Boilers Container in round and oval shapes Gasket Characteristics Surface pressure: min. 5 N/mm 2, max. 35 N/mm 2 Recommended boiler heating gradient: max. 2 °C /min Pay attention to assembly instruction (added to each single gasket)! Suitable for Safety Gasket for Steam Boilers and Vessels Approvals Boiler water/Media resistance: TRD 611 Component designation: TÜV.D.99-001.C Form of delivery Special dimensions in cross section 15 x 8 mm or 25 x 10 mm are available on request. Standard dimensions (mm) 80x110x15x8 100x150x15x8 115x165x15x8 80x120x15x8 120x150x15x8 120x160x15x8 90x120x15x8 110x150x15x8 200x300x25x10 150x200x15x8 280x380x25x10...