United Kingdom
Multi-Category
United Kingdom
Heavy Duty Automatic Bandsaw for solid bar, bundles & general sawing with the following features: Vice feed automatic with encoder for precision length set Twin hydraulic vices clamp both sides of material Simple input of component length and number of pieces via touch screen Steplessly variable blade speed 17 ~ 67m/mm Hydraulic blade tension control for optimum blade life. Variable downfeed control. The touch sensitive control screen provides easy selection of precise bar length requirement for a precise cut off length. The auto head-elevation reduces index cycling time significantly. The Blade speed is set and adjusted by acting on the touch sensitive control screen. There are quick-adjusting carbide saw-band guides, there is an idle wheel motion protector, a hydraulic band tension control, a quick-action HYDRAULIC twin-vice (split vice) 3-jaw clamping, a unique two-way vice jaw and an automatic chip conveyor.
Request for a quoteUnited Kingdom
Karmetal OSA 300x380 PLC Technical Details: • PLC control panel • Heavy duty construction • Hydraulic vice • Mechanical top clamps • Inverter controlled blade speed 25 to 90m/min • Hydro mechanical blade tension • Fast approach • Adjustable hydraulic regulation of the bow descent rate • Inverter driven blade speed • Swarf conveyor • 1.4 metre roller conveyor
Request for a quoteUnited Kingdom
The Bomar Workline 410.280DGH is a semi-automatic mitre bandsaw and is an ideal basic model for the production of steel structures. The both-sided mitre cuts continuously adjustable within the 0–60° range, with a large, easy-to-read angular scale. This machine features also an easily movable clamping vice for mitre cuts and a full-stroke hydraulic vice with a tightening system. Bomar Workline 410.280DGH Standard Details: 2 way mitre – 60° right, 60° left Easy to read mitre scale DRO for mitre angle Long stroke hydraulic vice Powered bow raise Adjustable back off valve for optimising downfeed speed relative to material mass Control box mounted on swinging arm Simple, robust push button controls Variable blade speed 20 to 120m/min Dovetail sliding vice for mitre cutting 27mm blade width Bed height: 756mm
Request for a quoteUnited Kingdom
Bomar Ergonomic 275.230DG Standard Details: Heavy duty one-piece cast bow Precision control hydraulic downfeed Substantial vices, quick set lever operation Bow rotates 45-90-60° Easy to read mitre scale Carbide blade guide pads and rollers Heavy duty blade tensioning unit Heavy duty, 3 phase motor Re-circulating coolant pump Adjustable guide arm Heavy duty gear train Blade speed: 35 & 70 m/min 500mm length stop included
Request for a quoteUnited Kingdom
The NCH plate saws are designed for quick and accurate cutting of bars and plates into strips of varying widths. This allows you to reduce inventories of cut-to-width stock and increase the flexibility of your sawing operation. Models are available in a wide range of sizes. High-productivity Automatic machines, with moving arc from 4 to 6 meters cutting length.
Request for a quoteUnited Kingdom
This Semi-Automatic Vertical Bandsaw is a large capacity machine that cuts aluminium, ferrous and non-ferrous materials.
Request for a quoteUnited Kingdom
The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard
Request for a quoteUnited Kingdom
Automatic upstroking circular saw with NC Programmable Controls. Yilmaz SK450 Standard Details Designed for high-volume straight cutting of non-ferrous profiles 4 – 6 second cycle time* High precision servo motors accurate to ±0.05mm* 450mm TCT blade with 4 kW motor Servo-controlled infeed speed and saw blade stroke adjustment Horizontal and vertical pneumatic clamping of the workpiece for precise cutting Automatic retraction of stock material at end of cut to protect the surface from scratches Single or multi-bar** (bundle) cutting Computer-controlled blade lubrication system System shuts down automatically after cutting the required quantity Interlocked safety guards Windows-based industrial PC with 7’’ LCD colour touch screen HMI & USB cutting job input Internet connection possible for technical support Automatic feeder stroke from 5 – 600mm. Maximum cutting length 9990mm Automatic end of bar sensor *Depending on material **Extra-cost option
Request for a quoteUnited Kingdom
This Geka Hydracrop 110S is a versatile and economic universal steelworker with 2 independent hydraulic cylinders, 2 areas and 5 workstations. It is suitable for punching profiles and for mounting special equipment. It benefits from a greater speed backed by a powerful hydraulic unit. Geka Hydracrop 110S Standard Details Machines driven by two cylinders 5 work stations, fitted with tools for L, shearing, round and square bars, rectangular notching and punching Quick change punch Flat bar shearing table with adjustable guides 2 simultaneous work stations Greater speed backed by a powerful hydraulic unit Special equipment for approaching at reduced pressure and slow speed Precision punching table with X & Y measuring stops Precision notching table with X & Y measuring stops Ready for production pack comprising: One meter "touch & cut" length stop with fine adjusting Lamp for enhanced vision of cutting zones 10 sets of round punches and dies
Request for a quoteUnited Kingdom
ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model. ASM - 3 Rolls Asymetical Plate Roll Machine Standard Details Body is made of cast iron construction Central rollers powered with electric motor, gearbox and gear drive Cone bending device Self brake main motor Upper roll is opanable by side Lower roll and back roll are with hand wheels up & down adjustable. Separate eletric control panel with foot pedal Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates ASM - 3 Rolls Asymetical Plate Roll Machine Optional Features Induction hardened rolls. Back roll with motor. Digital display.
Request for a quoteFrance
The F.E.B.A. automatic logging system was designed to unwind/rewind adhesive backed materials, paper, styrene, foils, woven and non woven, rubber, foam and other like materials. This logger is designed to accommodate master logs up to 1000MM in outside diameter with widths up to 1700MM (Standard Size Special Applications Available). MACHINE'S MAIN FEATURES Maximum material width is 1700MM. (Special Sizes Available) Maximum OD of the master jumbo log is 1000MM. (Special Sizes Available) Maximum OD of the rewound logs is 420MM. (Special Sizes Available) Working speeds from 0 120 meters per minute. (Other upon request) Rotary turret with two pneumatic shafts. Core inside diameters available in 1.5" or 3". Pneumatic jumbo roll shaft for 1.5" or 3" cores. Contrast jumbo roll and winding shafts The unwinding tension is adjustable with a pneumatic brake and a servodiameter valve. Path rollers coated in ceramic. (Plasma Coating)
Request for a quoteFrance
F.E.B.A. Laminating System is suitable for laminating, slitting and rewinding heat activated or cold bond adhesive products to fabrics, foam/rubber, soft foam, cork, felt and similar materials. Standard and special machines available to suit the customers specific converting application. UNWIND UNIT The unwind unit is composed of one station for the axial unwinding of the master logs. Manual web guide left and right. One 3" removable pneumatic shaft and brake. DRAWING UNITS The first drawing unit is composed of two large diameter siliconized rubber covered rolls; suitable for the unwinding of high and low thickness foam rolls. The second drawing unit is composed of two large diameter siliconized rubber covered rolls and will be equipped with a separate brake and clutch to be used when laminating very thin elastic materials or slitting narrow widths. UPPER UNWIND The upper unwind is to keep the single sided tape to be transferred. Manual web guide left & right.
Request for a quoteFrance
F.E.B.A. model F400 single knife automatic log slitter suitable for slitting adhesive & non adhesive tapes, kaptons, dense foams, PPL, PE, textiles, non wovens, TNT and similar materials with an outside diameter of 400mm. Standard features like sonar & laser technology allow for a fully automatic slitting cycle drastically reducing log changeover time. Proportional penetration speeds coupled with an automatic blade 'AXIS' angle offer the highest quality cut available. The model F400 can be equipped with a variety of optionals designed to enhance productivty and limiting operator fatigue. TECHNICAL SPECIFICATIONS Material Width 1.200 3.100mm Maximum Log OD 400mm Slitting Width 2mm 3.100mm Indexing Tolerance ± 0.05mm Blade Speed Range 10 1200RPM Material Speed Range 10 1200 RPM ALL F.E.B.A. SLITTING AND REWINDING SYSTEMS ARE MANUFACTURED IN ACCORDANCE WITH EUROPEAN EEC SAFETY AND HEALTH STANDARDS.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.