Pump Set B2 Battery PVDF with rotor, with flow meter
Drum Pump Sets
Description
Immersion depth: 1000 mm (sealless) suitable for emptying 200 l drums Conditionally safe to run dry For concentrated acids and alkalis such as chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite. Features: Medium to large filling volume Particularly high performance at a low weight Higher viscosity up to max. 400 mPas Higher pressures/flow rates Higher density up to max. 1.6 kg/dm³ Higher battery life Automatic switch-off at overload Replaceable, high-performance Li-Ion technology Infinitely variable for all demands Easy handling by using a convenient carrying handle, compact design and low weight Wear-free, low noise BLDC motor: Particularly high performance at low weight Easy disassembly with quick fastener Benefits: BLDC motor with a high level of efficiency up to 70% Infinitely varied Modular construction Low weight High battery capacity Long service life Low noise ≤ 70 dBA Sophisticated quick-action coupling
Product characteristics
- Motor
- PVDF with rotor
- Performance
- 70 watts (internally ventilated)
- Voltage
- 21.6 V
- Capacity
- 4 Ah
- Housing
- Polyvinylidene flouride
- Bearing
- ETFE/PTFE
- Drive shaft
- Hastelloy C
- Seals
- none
- Mechanical seal
- none
- Impeller
- ETFE
- Type of impeller
- Rotor
- Temperature of medium
- -15 up to +90 °C
- Immersion tube diameter
- 32 mm
- Immersion depths
- 1000 mm
- Weight
- 2.2 kg
- Delivery rate
- max. 80 l/min. (45 l/min.)
- Delivery head
- max. 8 m wc
- Viskosity
- max. 400 mPas
- Density
- 1.6 kg/dm³
Similar products from LUTZ PUMPEN GMBH
LUTZ PUMPEN GMBH
Germany
The pump set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. acetic acid etc. * Pump unit equipped with Lutz original handwheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & benefits * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants lubricants * Optimised drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.
LUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
LUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
LUTZ PUMPEN GMBH
Germany
The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of alkaline solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.